3.0 - unitypackage

Runtime/Component/Mark/MarkLine.cs

@@ -0,0 +1,252 @@
+
+using System.Collections.Generic;
+using UnityEngine;
+
+namespace XCharts
+{
+    /// <summary>
+    /// 标线类型
+    /// </summary>
+    public enum MarkLineType
+    {
+        None,
+        /// <summary>
+        /// 最小值。
+        /// </summary>
+        Min,
+        /// <summary>
+        /// 最大值。
+        /// </summary>
+        Max,
+        /// <summary>
+        /// 平均值。
+        /// </summary>
+        Average,
+        /// <summary>
+        /// 中位数。
+        /// </summary>
+        Median
+    }
+
+
+    /// <summary>
+    /// Use a line in the chart to illustrate.
+    /// 图表标线。
+    /// </summary>
+    [System.Serializable]
+    [ComponentHandler(typeof(MarkLineHandler), true)]
+    public class MarkLine : MainComponent
+    {
+        [SerializeField] private bool m_Show = true;
+        [SerializeField] private int m_SerieIndex = 0;
+        [SerializeField] private AnimationStyle m_Animation = new AnimationStyle();
+        [SerializeField] private List<MarkLineData> m_Data = new List<MarkLineData>();
+
+        /// <summary>
+        /// Whether to display the marking line.
+        /// 是否显示标线。
+        /// </summary>
+        public bool show
+        {
+            get { return m_Show; }
+            set { if (PropertyUtil.SetStruct(ref m_Show, value)) SetVerticesDirty(); }
+        }
+        public int serieIndex
+        {
+            get { return m_SerieIndex; }
+            set { if (PropertyUtil.SetStruct(ref m_SerieIndex, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// The animation of markline.
+        /// 标线的动画样式。
+        /// </summary>
+        public AnimationStyle animation
+        {
+            get { return m_Animation; }
+            set { if (PropertyUtil.SetClass(ref m_Animation, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// A list of marked data. When the group of data item is 0, each data item represents a line; 
+        /// When the group is not 0, two data items of the same group represent the starting point and 
+        /// the ending point of the line respectively to form a line. In this case, the relevant style 
+        /// parameters of the line are the parameters of the starting point.
+        /// 标线的数据列表。当数据项的group为0时，每个数据项表示一条标线；当group不为0时，相同group的两个数据项分别表
+        /// 示标线的起始点和终止点来组成一条标线，此时标线的相关样式参数取起始点的参数。
+        /// </summary>
+        public List<MarkLineData> data
+        {
+            get { return m_Data; }
+            set { if (PropertyUtil.SetClass(ref m_Data, value)) SetVerticesDirty(); }
+        }
+
+        public override void SetDefaultValue()
+        {
+            data.Clear();
+            var item = new MarkLineData();
+            item.name = "average";
+            item.type = MarkLineType.Average;
+            item.lineStyle.type = LineStyle.Type.Dashed;
+            item.lineStyle.color = Color.blue;
+            item.startSymbol.show = true;
+            item.startSymbol.type = SymbolType.Circle;
+            item.endSymbol.show = true;
+            item.endSymbol.type = SymbolType.Arrow;
+            item.label.show = true;
+            item.label.numericFormatter = "f1";
+            item.label.formatter = "{c}";
+            data.Add(item);
+        }
+    }
+    /// <summary>
+    /// Data of marking line. 
+    /// 图表标线的数据。
+    /// </summary>
+    [System.Serializable]
+    public class MarkLineData : ChildComponent
+    {
+        [SerializeField] private MarkLineType m_Type = MarkLineType.None;
+        [SerializeField] private string m_Name;
+        [SerializeField] private int m_Dimension = 1;
+        [SerializeField] private float m_XPosition;
+        [SerializeField] private float m_YPosition;
+        [SerializeField] private double m_XValue;
+        [SerializeField] private double m_YValue;
+        [SerializeField] private int m_Group = 0;
+        [SerializeField] private bool m_ZeroPosition = false;
+
+        [SerializeField] private SymbolStyle m_StartSymbol = new SymbolStyle();
+        [SerializeField] private SymbolStyle m_EndSymbol = new SymbolStyle();
+        [SerializeField] private LineStyle m_LineStyle = new LineStyle();
+        [SerializeField] private LabelStyle m_Label = new LabelStyle();
+        //[SerializeField] private Emphasis m_Emphasis = new Emphasis();
+
+        public Vector3 runtimeStartPosition { get; internal set; }
+        public Vector3 runtimeEndPosition { get; internal set; }
+        public Vector3 runtimeCurrentEndPosition { get; internal set; }
+        public ChartLabel runtimeLabel { get; internal set; }
+        public double runtimeValue { get; internal set; }
+
+        /// <summary>
+        /// Name of the marker, which will display as a label.
+        /// 标线名称，将会作为文字显示。label的formatter可通过{b}显示名称，通过{c}显示数值。
+        /// </summary>
+        public string name
+        {
+            get { return m_Name; }
+            set { if (PropertyUtil.SetClass(ref m_Name, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// Special label types, are used to label maximum value, minimum value and so on.
+        /// 特殊的标线类型，用于标注最大值最小值等。
+        /// </summary>
+        public MarkLineType type
+        {
+            get { return m_Type; }
+            set { if (PropertyUtil.SetStruct(ref m_Type, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// From which dimension of data to calculate the maximum and minimum value and so on.
+        /// 从哪个维度的数据计算最大最小值等。
+        /// </summary>
+        public int dimension
+        {
+            get { return m_Dimension; }
+            set { if (PropertyUtil.SetStruct(ref m_Dimension, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// The x coordinate relative to the origin, in pixels.
+        /// 相对原点的 x 坐标，单位像素。当type为None时有效。
+        /// </summary>
+        public float xPosition
+        {
+            get { return m_XPosition; }
+            set { if (PropertyUtil.SetStruct(ref m_XPosition, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// The y coordinate relative to the origin, in pixels.
+        /// 相对原点的 y 坐标，单位像素。当type为None时有效。
+        /// </summary>
+        public float yPosition
+        {
+            get { return m_YPosition; }
+            set { if (PropertyUtil.SetStruct(ref m_YPosition, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// The value specified on the X-axis. A value specified when the X-axis is the category axis represents the index of the category axis data, otherwise a specific value.
+        /// X轴上的指定值。当X轴为类目轴时指定值表示类目轴数据的索引，否则为具体的值。当type为None时有效。
+        /// </summary>
+        public double xValue
+        {
+            get { return m_XValue; }
+            set { if (PropertyUtil.SetStruct(ref m_XValue, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// That's the value on the Y-axis. The value specified when the Y axis is the category axis represents the index of the category axis data, otherwise the specific value.
+        /// Y轴上的指定值。当Y轴为类目轴时指定值表示类目轴数据的索引，否则为具体的值。当type为None时有效。
+        /// </summary>
+        public double yValue
+        {
+            get { return m_YValue; }
+            set { if (PropertyUtil.SetStruct(ref m_YValue, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// Grouping. When the group is not 0, it means that this data is the starting point or end point of the marking line. Data consistent with the group form a marking line.
+        /// 分组。当group不为0时，表示这个data是标线的起点或终点，group一致的data组成一条标线。
+        /// </summary>
+        public int group
+        {
+            get { return m_Group; }
+            set { if (PropertyUtil.SetStruct(ref m_Group, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// Is the origin of the coordinate system.
+        /// 是否为坐标系原点。
+        /// </summary>
+        public bool zeroPosition
+        {
+            get { return m_ZeroPosition; }
+            set { if (PropertyUtil.SetStruct(ref m_ZeroPosition, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// The symbol of the start point of markline.
+        /// 起始点的图形标记。
+        /// </summary>
+        public SymbolStyle startSymbol
+        {
+            get { return m_StartSymbol; }
+            set { if (PropertyUtil.SetClass(ref m_StartSymbol, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// The symbol of the end point of markline.
+        /// 结束点的图形标记。
+        /// </summary>
+        public SymbolStyle endSymbol
+        {
+            get { return m_EndSymbol; }
+            set { if (PropertyUtil.SetClass(ref m_EndSymbol, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// The line style of markline.
+        /// 标线样式。
+        /// </summary>
+        public LineStyle lineStyle
+        {
+            get { return m_LineStyle; }
+            set { if (PropertyUtil.SetClass(ref m_LineStyle, value)) SetVerticesDirty(); }
+        }
+        /// <summary>
+        /// Text styles of label. You can set position to Start, Middle, and End to display text in different locations.
+        /// 文本样式。可设置position为Start、Middle和End在不同的位置显示文本。
+        /// </summary>
+        public LabelStyle label
+        {
+            get { return m_Label; }
+            set { if (PropertyUtil.SetClass(ref m_Label, value)) SetVerticesDirty(); }
+        }
+        // public Emphasis emphasis
+        // {
+        //     get { return m_Emphasis; }
+        //     set { if (PropertyUtil.SetClass(ref m_Emphasis, value)) SetVerticesDirty(); }
+        // }
+    }
+}