修复DataZoom点击时指示区域不准的问题

增加Legend的Width和Height可设置固定宽高
修复Serie的EndLabel在Y轴是MinMax类型时显示的数值不对的问题
2026-05-27 11:40:13 +00:00 · 2026-05-17 22:52:05 +08:00 · 2026-05-17 18:47:47 +08:00 · 2026-05-17 18:37:47 +08:00 · 2026-05-17 18:28:03 +08:00 · 2026-05-16 22:33:40 +08:00
641 changed files with 64681 additions and 18961 deletions
--- a/.github/FUNDING.yml
+++ b/.github/FUNDING.yml
@@ -0,0 +1,13 @@
+# These are supported funding model platforms
+
+github: # Replace with up to 4 GitHub Sponsors-enabled usernames e.g., [user1, user2]
+patreon: # Replace with a single Patreon username
+open_collective: # Replace with a single Open Collective username
+ko_fi: # Replace with a single Ko-fi username
+tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
+community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
+liberapay: # Replace with a single Liberapay username
+issuehunt: # Replace with a single IssueHunt username
+otechie: # Replace with a single Otechie username
+lfx_crowdfunding: # Replace with a single LFX Crowdfunding project-name e.g., cloud-foundry
+custom: ['https://github.com/XCharts-Team/XCharts/blob/master/Documentation~/zh/img/support_alipay.png','https://github.com/XCharts-Team/XCharts/blob/master/Documentation~/zh/img/support_wechat.png']
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -1,602 +0,0 @@
-
-# 更新日志
-
-[master](#master)
-[v2.7.0](#v2.7.0)  
-[v2.6.0](#v2.6.0)  
-[v2.5.0](#v2.5.0)  
-[v2.4.0](#v2.4.0)
-[v2.3.0](#v2.3.0)  
-[v2.2.3](#v2.2.3)  
-[v2.2.2](#v2.2.2)  
-[v2.2.1](#v2.2.1)  
-[v2.2.0](#v2.2.0)  
-[v2.1.1](#v2.1.1)  
-[v2.1.0](#v2.1.0)  
-[v2.0.1](#v2.0.1)  
-[v2.0.0](#v2.0.0)  
-[v2.0.0-preview.2](#v2.0.0-preview.2)  
-[v2.0.0-preview.1](#v2.0.0-preview.1)  
-[v1.6.3](#v1.6.3)  
-[v1.6.1](#v1.6.1)  
-[v1.6.0](#v1.6.0)  
-[v1.5.2](#v1.5.2)  
-[v1.5.1](#v1.5.1)  
-[v1.5.0](#v1.5.0)  
-[v1.4.0](#v1.4.0)  
-[v1.3.1](#v1.3.1)  
-[v1.3.0](#v1.3.0)  
-[v1.2.0](#v1.2.0)  
-[v1.1.0](#v1.1.0)  
-[v1.0.5](#v1.0.5)  
-[v1.0.4](#v1.0.4)  
-[v1.0.3](#v1.0.3)  
-[v1.0.2](#v1.0.2)  
-[v1.0.1](#v1.0.1)  
-[v1.0.0](#v1.0.0)  
-[v0.8.3](#v0.8.3)  
-[v0.8.2](#v0.8.2)  
-[v0.8.1](#v0.8.1)  
-[v0.8.0](#v0.8.0)  
-[v0.5.0](#v0.5.0)  
-[v0.1.0](#v0.1.0)  
-
-## master
-
-## v2.7.0
-
-* (2022.03.20) 发布`v2.7.0`版本
-* (2022.02.21) 修复`Chart`的`chartName`重复检测问题 #183
-* (2022.02.17) 修复`Axis`的`SplitLine`可能会显示在坐标系外的问题 #181
-* (2022.02.08) 修复数据全0时`{d}`显示不正确的问题
-* (2022.02.08) 修复`YAxis`的`AxisLabel`的`onZero`参数不生效的问题
-* (2022.01.06) 优化`Zebra`斑马柱图
-
-## v2.6.0
-
-* (2021.12.30) 发布`v2.6.0`版本
-* (2021.12.21) 修复`Emphasis`不生效的问题
-* (2021.12.17) 修复`MarkLine`在运行时`Label`不自动刷新显示隐藏的问题 #178
-* (2021.12.10) 完善`Radar`的`AxisLine`和`SplitLine`可单独控制
-* (2021.12.08) 修复`Serie`隐藏后`Y`轴最大值不刷新的问题
-* (2021.12.04) 增加`Symbol`新类型：`EmptyRect`,`EmptyTriangle`,`EmptyDiamond`
-* (2021.12.04) 增加`Symbol`的`Empty`区域颜色可通过`ItemStyle`的`backgroundColor`设置的支持
-* (2021.12.03) 修复`Formatter`的`{c}`通配符不生效的问题 #175
-* (2021.12.03) 修复`Axis`的`boundaryGap`某些情况下显示的问题 #174
-* (2021.11.30) 修复`Serie`的`ignore`某些情况下绘制异常的问题 #173
-
-## v2.5.0
-
-* (2021.11.27) 发布`v2.5.0`版本
-* (2021.11.27) 增加`Tooltip`的`positionFunction`的坐标设置委托函数
-* (2021.10.29) 移除`XCharts`首次导入时`TextMeshPro`的相关设置
-* (2021.10.29) 增加`Tooltip`对通配符`{e}`的支持 #170
-* (2021.09.08) 完善`RadarChart`
-* (2021.09.07) 修复`PieChart`渐出动画结束时`label`没有消失的问题 #168
-* (2021.09.06) 修复`GaugeChart`用代码改变`splitNumber`不会刷新`label`的问题 #167
-
-## v2.4.0
-
-### 版本要点
-
-* 折线图支持忽略数据的连线是断开还是连接
-* 折线图支持轨迹匀速动画
-* 其他优化和问题修复
-
-### 日志详情
-
-* (2021.08.31) 发布`v2.4.0`版本
-* (2021.08.31) 优化`RingChart`的渐变效果
-* (2021.08.31) 修复`DataZoom`拖动时`SerieLabel`不刷新的问题 (#165)
-* (2021.08.25) 修复`Theme`主题切换无法保持到场景上的问题 (#166)
-* (2021.08.24) 增加`Animation`的`alongWithLinePath`参数设置折线轨迹匀速动画
-* (2021.08.22) 增加`Serie`的`ignoreLineBreak`参数设置忽略数据连线是否断开 (#164)
-* (2021.08.22) 修复`Axis`在`DataZoom`开启时`Label`可能不更新的问题 (#164)
-* (2021.08.15) 优化`Axis`的`AxisLabel`文本旋转设置，避免在DataZoom开启时偏移不一致 (#163)
-* (2021.08.14) 增加`Legend`的`textAutoColor`设置文本颜色和`Serie`一致 (#163)
-* (2021.08.12) 优化`BarChart`设置`Corner`时正负柱条圆角对称
-* (2021.08.03) 优化`Serie`的数据全为0时Y轴不显示的问题
-* (2021.07.29) 修复`Serie`开启`ignore`时被忽略的数据还会参与计算的问题 (#161)
-* (2021.07.29) 完善`BarChart`的`Zebra`斑马柱图渐变支持
-* (2021.07.26) 修复`TextMeshPro Enable`时找不到`XCharts`路径的问题 (#160)
-
-## v2.3.0
-
-### 版本要点
-
-* 数据存储由`float`升级为`double`
-* 新增`MarkLine`标线
-* `Serie`下可用`IconStyle`统一配置图标
-* `Label`支持用代码自定义显示样式
-* `DataZoom`完善
-* `PieChart`优化
-* 问题修复
-
-### 升级注意
-
-由于数据类型升级为了`double`，`float`隐式转`double`可能有精度问题，所以建议之前为`float`的数据类型都手动改为`double`类型。
-
-### 日志详情
-
-* (2021.07.24) 发布`v2.3.0`版本
-* (2021.07.22) 完善`SerieSymbol`以支持象形柱图`PictorialBarChart`扩展
-* (2021.07.19) 修复`WdbGL`平台上`Tooltip`不显示的问题
-* (2021.07.18) 增加`Serie`的`iconStyle`统一配置图标
-* (2021.07.15) 增加`MarkLine`标线 (#142)
-* (2021.07.09) 优化`BarChart`可通过`serieData.show`设置是否显示柱条
-* (2021.07.08) 优化`data`数据存储类型由`float`全部转为`double`
-* (2021.07.05) 修复`PieChart`的`avoidLabelOverlap`参数不生效的问题
-* (2021.07.04) 修复`PieChart`选中扇区后鼠标区域指示不准确的问题
-* (2021.07.04) 优化`PieChart`的`Label`为`Inside`时可通过参数`Margin`调节偏移
-* (2021.07.01) 增加`DataZoom`的`supportInsideScroll`和`supportInsideDrag`参数设置坐标系内是否支持滚动和拖拽
-* (2021.06.27) 增加`AxisLabel`的`showStartLabel`和`showEndLabel`参数设置首尾的`Label`是否显示
-* (2021.06.27) 增加`AxisLabel`和`SerieLabel`的`formatter`委托方法 (#145)
-* (2021.06.27) 增加`DataZoom`的`orient`参数设置水平或垂直样式
-* (2021.06.21) 增加`IconStyle`的`autoHideWhenLabelEmpty`参数设置当`label`为空时是否自动隐藏图标
-
-## v2.2.3
-
-* (2021.06.20) 发布`v2.2.3`版本
-* (2021.06.20) 修复`Axis`的`Icon`默认显示出来的问题
-
-## v2.2.2
-
-* (2021.06.18) 发布`v2.2.2`版本
-* (2021.06.18) 优化`Axis`的`Label`为空时自动隐藏`Icon`
-* (2021.06.17) 修复`maxCache`设置时实际数据个数多一个的问题
-* (2021.06.17) 修复`TextMeshPro`的开启和关闭不及时刷新的问题
-* (2021.06.17) 修复`XCharts`导入时总是弹出`XCharts Importer`的问题
-
-## v2.2.1
-
-* (2021.06.13) 发布`v2.2.1`版本
-* (2021.06.13) 完善对多屏幕的支持
-* (2021.06.12) 增加`IconStyle`的`align`参数设置图标的水平对齐
-* (2021.06.12) 完善`Theme`主题导入 (#148)
-* (2021.06.10) 修复`Unity`版本兼容问题 (#154)
-* (2021.06.05) 完善`CandlestickChart`对`inverse`的支持 (#152)
-* (2021.06.04) 修复`Gauge`在最小值为负数时指针指示位置异常的问题 (#153)
-
-## v2.2.0
-
-* (2021.05.30) 发布`v2.2.0`版本
-* (2021.05.25) 完善`TextStyle`的`alignment`的支持 (#150)
-* (2021.05.24) 修复`PieChart`数据全为`0`时`Label`无法正常显示的问题
-* (2021.05.24) 修复`Add Serie`面板上`Serie Name`不生效的问题 (#149)
-* (2021.05.23) 增加`TextStyle`的`autoWrap`设置是否自动换行
-* (2021.05.23) 增加`TextStyle`的`autoAlign`设置是否让系统自动设置对齐方式
-* (2021.05.23) 增加`AxisLabel`的`width`和`height`支持自定义文本的长宽
-* (2021.05.23) 增加`Axis`的`iconStyle`和`icons`支持设置坐标轴标签显示图标
-* (2021.05.20) 增加`Serie`和`Axis`的`insertDataToHead`参数控制数据插入头部还是尾部
-* (2021.05.18) 优化`Editor`下的图表创建 #147
-* (2021.05.16) 抽离`GanttChart`甘特图，通过扩展模块的方式来提供
-* (2021.05.11) 增加`VisualMap`对`Piecewise`分段设置颜色的支持
-* (2021.05.09) 修复`RingChart`无法设置环形的背景色的问题 #141
-* (2021.05.08) 增加`LiquidChart`的方形水位图支持
-* (2021.05.07) 优化`Axis`的刻度表现 #135
-* (2021.05.01) 增加`Settings`中关于关于材质球设置的参数 #140
-* (2021.05.01) 修复无法正确表示部分超大或超小数值的问题
-* (2021.04.29) 修复`Radar`切换到`Circle`异常的问题 #139
-* (2021.04.29) 增加`Settings`的`reversePainter`可设置`Serie`的绘制是否逆序
-* (2021.04.28) 增加`SerieData`的`ignore`可忽略当前数据项
-* (2021.04.28) 修复`DataZoom`下`AxisLabel`显示不准确的问题 #138
-* (2021.04.26) 修复运行时动态创建图表会异常的问题 #137
-* (2021.04.26) 增加`BarChart`绘制渐变边框的支持
-* (2021.04.23) 增加自定义图表支持
-* (2021.04.22) 修复`Gauge`的`AxisLabel`和文字颜色无法调整的问题
-* (2021.04.13) 增加`AxisTick`的`ShowStartTick`和`ShowEndTick`参数控制第一个和最后一个刻度是否显示
-* (2021.04.13) 完善多坐标轴的支持 #132
-
-## v2.1.1
-
-* (2021.04.13) 整理代码，清除`Warning`
-* (2021.04.13) 修复`Unity`版本兼容问题
-* (2021.04.12) 修复`Theme`重构后引起的`missing class attribute 'ExtensionOfNativeClass'`的问题 #131
-
-## v2.1.0
-
-* (2021.04.07) 发布`v2.1.0`版本
-* (2021.03.31) 优化和重构`Theme`，解决引用相同或丢失的问题 #118
-* (2021.03.30) 优化`Tooltip`支持设置不同的类目轴数据 #129
-* (2021.03.29) 优化自定义绘制回调接口，增加`onCustomDrawBeforeSerie`、`onCustomDrawAfterSerie`和`onCustomDrawTop`
-* (2021.03.25) 增加`GanttChart`甘特图
-* (2021.03.22) 增加`Theme`的`Unbind`按钮用于解绑复制图表时的主题 #118
-* (2021.03.18) 修复`Inspector`下`Foldout`后的勾选框无法选中的问题
-* (2021.03.18) 修复`BarChart`在`0`数值时显示异常的问题
-* (2021.03.14) 修复`Tooltip`的指示器在某些情况下指示位置不准的问题
-* (2021.03.13) 优化`MultiComponentMode`开启后的编辑体验和组件刷新 #128
-* (2021.03.10) 增加`CandlestickChart`K线图 #124
-* (2021.03.06) 增加`PieChart`的`minAngle`参数支持设置最小扇区角度 #117
-* (2021.03.05) 增加`Legend`几种内置图标的支持 #90
-* (2021.03.02) 增加`DataZoom`对数值轴的支持 #71
-* (2021.03.02) 优化`TextMeshPro`兼容问题 #125
-* (2021.03.01) 修复隐藏和显示图表时部分已隐藏的节点显示异常的问题 #125
-
-## v2.0.1
-
-* (2021.02.26) 修复`HeatmapChart`的`Tooltip`指示的位置不准的问题 #123
-* (2021.02.22) 修复`Unity`版本兼容问题
-* (2021.02.21) 增加`Tooltip`的`ignoreDataShow`参数
-* (2021.02.19) 修复图表在`LayoutGroup`控制下时可能显示错乱的问题 #121
-* (2021.02.18) 修复`Radar`参数变更后无法自刷新的问题 #122
-
-## v2.0.0
-
-* (2021.02.05) 发布`v2.0.0`版本
-* (2021.02.03) 修复`AxisLine`的`OnZero`对`YAxis`不生效的问题 #116
-* (2021.01.29) 修复`Category`轴在`BoundaryGap`和`AlignWithLabel`为`True`时`Tick`显示效果不对的问题 #115
-* (2021.01.25) 优化一些细节
-* (2021.01.22) 修复`Inpsector`上部分属性显示异常的问题
-
-## v2.0.0-preview.2
-
-* (2021.01.21) 发布`v2.0.0-preview.2`版本
-* (2021.01.21) 修复`Inpsector`上展开`AxisTick`时报错问题
-* (2021.01.21) 修复打包兼容报错问题
-* (2021.01.19) 增加`XChartsSettings`的`editorShowAllListData`参数配置是否在`Inspector`中显示列表的所有数据
-
-## v2.0.0-preview.1
-
-* (2021.01.19) 发布`v2.0.0-preview.1`版本
-
-## v1.6.3
-
-* (2021.01.02) 发布`v1.6.3`版本
-* (2020.12.18) 修复`Animation`不启用时更新数据会导致图表一直刷新的问题
-* (2020.12.01) 修复`Unity2020`上新创建的图表无法正常绘制的问题
-* (2020.11.22) 发布`v1.6.2`版本
-* (2020.11.22) 修复`LineChart`在数据过于密集时折线绘制异常的问题 #99
-* (2020.11.21) 修复`LineChart`的刻度位置在`alignWithLabel`为`true`时可能异常的问题
-* (2020.11.21) 修复`Unity5`兼容报错的问题
-* (2020.11.13) 完善`RadarChart`的`Indicator`对`\n`换行的支持
-* (2020.11.12) 修复`LineChart`当类型为`Smooth`时数据过密情况下报错的问题 #100
-* (2020.10.22) 完善`HeatmapChart`中`VisualMap`对`Piecewise`的支持
-* (2020.09.22) 修复`PieChart`边框大小不一致的问题
-
-## v1.6.1
-
-* (2020.09.19) 发布`v1.6.1`版本
-* (2020.09.19) 增加`Remove All Chart Object`移除图表下的所有子节点（会自动重新初始化）
-* (2020.09.18) 修复`SerieLabel`在点击图例隐藏`Serie`后还显示的问题#94
-* (2020.09.18) 优化`Axis`的类目轴刻度和文本显示#93
-* (2020.09.17) 修复`Package`导入时缺失`meta`文件导致失败的问题#92
-* (2020.09.08) 优化`Legend`的颜色可自动匹配`ItemStyle`的自定义颜色#89
-* (2020.09.05) 优化`LineChart`在不使用`XAxis1`时也能显示`XAxis1`
-* (2020.08.29) 增加`LineStyle`的`toColor`和`toColor2`设置`LineChart`的水平渐变，取消通过`ItemStyle`设置`LineChart`的水平渐变
-* (2020.08.29) 增加`PieChart`的`onPointerClickPie`点击扇形图扇区回调
-* (2020.08.29) 增加`BarChart`的`onPointerClickBar`点击柱形图柱条回调
-
-## v1.6.0
-
-* (2020.08.24) 发布`v1.6.0`版本
-* (2020.08.23) 重构代码，将与绘制相关的`Color`改为`Color32`，减少隐式转换（更新后会导致自定义的颜色丢失，可参考[问答29](https://github.com/XCharts-Team/XCharts/blob/master/Assets/XCharts/Documentation/XChartsFQA-ZH.md)进行升级）
-* (2020.08.15) 优化`PieChart`绘制表现效果#85
-* (2020.08.11) 增加`LiquidChart`数据变更动画#83
-* (2020.08.11) 优化`PieChart`文本堆叠和引线效果#85
-* (2020.08.08) 优化`LineChart`密集数据的绘制表现效果
-* (2020.07.30) 增加`LineChart`可通过`VisualMap`或`ItemStyle`配置渐变#78
-* (2020.07.25) 修复`LineChart`渐出动画绘制异常的问题#79
-* (2020.07.25) 修复`LiquidChart`在`100%`时渐变色会失效的问题#80
-* (2020.07.25) 增加`RadarChart`对`Tooltip`的`formatter`支持#77
-* (2020.07.23) 增加`RingChart`环形渐变支持#75
-* (2020.07.21) 增加`AxisLabel`和`SerieLabel`的`formatter`可单独配置数值格式化#68
-* (2020.07.17) 增加`SerieAnimation`动画完成回调接口
-* (2020.07.17) 优化`Chart`放在`ScrollView`下时不影响`ScrollView`的滚动和拖动
-* (2020.07.16) 修复`Tooltip`在上层有遮挡还会显示的问题#74
-* (2020.07.08) 优化`Scatter`类型`Serie`支持`Log`轴#70
-* (2020.07.07) 修复`SerieLabel`位置错乱的问题
-* (2020.07.07) 增加`Tooltip`的`offset`参数配置偏移
-* (2020.07.06) 增加`LiquidChart`水位图
-* (2020.07.01) 增加`PolarChart`极坐标图表
-
-## v1.5.2
-
-* (2020.06.25) 发布`v1.5.2`版本
-* (2020.06.25) 修复`BarChart`在数值为`0`时还会绘制一小部分柱条的问题
-* (2020.06.24) 修复`PieChart`在设置`clockwise`后绘制异常的问题#65
-* (2020.06.23) 优化`LineChart`在峰谷差异过大时的绘制效果#64
-* (2020.06.18) 修复`SerieLabel`在重新添加数据时可能不显示的问题
-* (2020.06.17) 增加`SerieData`可单独设置`SerieSymbol`#66
-* (2020.06.17) 修复`Check For Update`在`Unity 2018`部分版本报错的问题#63
-* (2020.06.16) 增加`Serie`的`avoidLabelOverlap`参数避免饼图标签堆叠的情况#56
-* (2020.06.15) 修复`SerieLabel`单独控制显示时可能错乱的问题
-* (2020.06.11) 修复`Check warning`不生效的问题
-* (2020.06.11) 修复`PieChart`和`RingChart`在数据占比很小时不显示的问题
-* (2020.06.11) 增加`Tooltip`的`titleFormatter`支持配置占位符`{i}`表示忽略不显示标题
-* (2020.06.07) 增加`Animation`的`customFadeInDelay`等自定义数据项延时和时长回调函数#58
-* (2020.06.07) 优化`PieChart`在数据全为`0`时的显示为等份的效果#59
-* (2020.06.04) 增加`SerieLabel`的`autoOffset`参数设置是否自动判断上下偏移
-* (2020.06.04) 增加`Tooltip`的`alwayShow`参数设置触发后一直显示
-* (2020.06.04) 优化`Tooltip`的`formatter`支持`{.1}`通配符
-* (2020.06.04) 优化`Legend`数量过多时自动换行显示#53
-
-## v1.5.1
-
-* (2020.06.03) 发布`v1.5.1`版本
-* (2020.06.02) 增加`Radar`的`ceilRate`，设置最大最小值的取整倍率
-* (2020.06.02) 优化`Tooltip`的`formatter`，支持`{c1:1-1:f1}`格式配置
-* (2020.05.31) 优化`Background`组件的生效条件，需要有单独的父节点（升级前需要自己处理旧的背景节点）
-* (2020.05.30) 优化`PieChart`支持设置`ignoreValue`不显示指定数据
-* (2020.05.30) 修复`RadarChart`为`Circle`时不绘制`SplitArea`的问题
-* (2020.05.30) 优化`RadarChart`在设置`max`为`0`时可自动刷新最大值
-* (2020.05.29) 修复`PieChart`设置`gap`时只有一个数据时绘制异常的问题
-* (2020.05.27) 修复调用`UpdateDataName()`接口时不会自动刷新的问题
-* (2020.05.27) 优化`柱状图`的渐变色效果
-* (2020.05.24) 修复`Axis`同时设置`boundaryGap`和`alignWithLabel`时`Tick`绘制异常的问题
-* (2020.05.24) 优化版本更新检测
-
-## v1.5.0
-
-* (2020.05.22) 发布`v1.5.0`版本
-* (2020.05.21) 增加`圆角柱图`支持渐变
-* (2020.05.21) 增加`Background`背景组件
-* (2020.05.19) 隐藏`Hierarchy`试图下自动生成的子节点
-* (2020.05.18) 增加`chartName`属性可指定图表的别称，可通过`XChartMgr.Instance.GetChart(chartName)`获取图表
-* (2020.05.16) 增加部分鼠标事件回调
-* (2020.05.15) 优化自带例子，`Demo`改名为`Example`
-* (2020.05.13) 增加`Serie`的`large`和`largeThreshold`参数配置折线图和柱状图的性能模式
-* (2020.05.13) 完善Demo，增加性能演示Demo
-* (2020.05.13) 优化性能，优化大数据绘制，重构代码
-* (2020.05.04) 增加`numericFormatter`参数可配置数值格式化显示，去掉`forceENotation`参数
-* (2020.04.28) 增加`自由锚点`支持，任意对齐方式
-* (2020.04.23) 优化`ScatterChart`的`Tooltip`显示效果
-* (2020.04.23) 增加`Tooltip`的`formatter`对`{.}`、`{c:0}`、`{c1:1}`的支持
-* (2020.04.19) 优化`LineChart`折线图的区域填充渐变效果
-* (2020.04.19) 增加`AxisLabel`的`onZero`参数可将`Label`显示在`0`刻度上
-* (2020.04.19) 增加`Serie`和`AxisLabel`的`showAsPositiveNumber`参数将负数数值显示为正数
-* (2020.04.18) 增加`Covert XY Axis`互换XY轴配置
-* (2020.04.17) 增加`Axis`可通过`inverse`参数设置坐标轴反转
-* (2020.04.16) 修复`Check warning`在`Unity2019.3`上的显示问题
-* (2020.04.16) 修复`PieChart`在设置`Space`参数后动画绘制异常的问题
-
-## v1.4.0
-
-* (2020.04.11) 发布`v1.4.0`版本
-* (2020.04.11) 增加`Check warning`检测功能
-* (2020.04.09) 修复`Legend`初始化异常的问题
-* (2020.04.08) 增加`PieChart`通过`ItemStyle`设置边框的支持
-* (2020.03.29) 增加`Axis`的`ceilRate`设置最大最小值的取整倍率
-* (2020.03.29) 增加`BarChart`可通过`itemStyle`的`cornerRadius`设置`圆角柱图`
-* (2020.03.29) 增加`itemStyle`的`cornerRadius`支持圆角矩形
-* (2020.03.24) 优化`Editor`参数编辑，兼容`Unity2019.3`及以上版本
-* (2020.03.24) 增加`Serie`在`inspector`上可进行调整顺序、添加和删除操作
-* (2020.03.23) 修复`Title`的`textStyle`和`subTextStyle`无效的问题
-* (2020.03.22) 增加`BarChart`通过`barType`参数设置`胶囊柱状图`
-* (2020.03.21) 增加`BarChart`和`HeatmapChart`可通过`ignore`参数设置忽略数据的支持
-* (2020.03.21) 增加`ItemStyle`的`tooltipFormatter`参数可单独配置`Serie`的`Tooltip`显示
-* (2020.03.20) 修复`X Axis 1`和`Y Axis 1`配置变更时不会自动刷新的问题
-* (2020.03.20) 增加`AxisTick`的`width`参数可单独设置坐标轴刻度的宽度
-* (2020.03.20) 增加`Serie`的`radarType`参数设置`多圈`和`单圈`雷达图
-* (2020.03.17) 增加`BarChart`可用`ItemStyle`的`backgroundColor`设置数据项背景颜色
-* (2020.03.17) 增加`SerieData`的`ItemStyle`和`Emphasis`可单独配置数据项样式的支持
-* (2020.03.15) 重构`EmptyCricle`类型的`Symbol`边宽取自`ItemStyle`的`borderWidth`参数
-* (2020.03.15) 重构`SerieSymbol`，去掉`color`和`opacity`参数，取自`ItemStyle`
-
-## v1.3.1
-
-* (2020.03.14) 发布`v1.3.1`版本
-* (2020.03.14) 修复`LineChart`开启`ingore`时部分数据可能绘制异常的问题
-* (2020.03.13) 修复`LineChart`的`label`偏移显示异常的问题
-
-## v1.3.0
-
-* (2020.03.11) 发布`v1.3.0`版本
-* (2020.03.11) 优化`LineChart`的`label`偏移显示
-* (2020.03.11) 优化清空并重新添加数据后的自动刷新问题
-* (2020.03.10) 增加`LineChart`的普通折线图可通过`ignore`参数设置忽略数据的支持
-* (2020.03.09) 增加`BarChart`可通过`ItemStyle`配置边框的支持
-* (2020.03.08) 增加`RingChart`环形图
-* (2020.03.05) 调整`Serie`的`arcShaped`参数重命名为`roundCap`
-* (2020.03.05) 增加运行时和非运行时参数变更自动刷新图表
-* (2020.02.26) 重构`Legend`图例，改变样式，增加自定义图标等设置
-* (2020.02.23) 增加`BaseChart.AnimationFadeOut()`渐出动画，重构动画系统
-* (2020.02.13) 增加`BaseChart.RefreshTooltip()`接口立即重新初始化`Tooltip`组件
-* (2020.02.13) 增加`Tooltip`的`textStyle`参数配置内容文本样式，去掉`fontSize`和`fontStyle`参数
-* (2020.02.13) 增加`TextStyle`的`lineSpacing`参数配置行间距
-* (2020.02.11) 增加`Radar`的`splitLine`参数配置分割线，去掉`lineStyle`参数
-* (2020.02.11) 增加`Tooltip`的`backgroundImage`参数配置背景图
-* (2020.02.11) 增加`Tooltip`的`paddingLeftRight`和`paddingTopBottom`参数配置文字和边框的间距
-* (2020.02.11) 增加`Tooltip`的`lineStyle`参数配置指示线样式
-* (2020.02.11) 增加`Axis`的`splitLine`参数控制分割线，去掉`showSplitLine`和`splitLineType`参数（更新时需要重新设置分割线相关设置）
-* (2020.02.10) 增加`Serie`的`clip`参数控制是否超出坐标系外裁剪（只适用于折线图、柱状图、散点图）
-* (2020.02.08) 增加`SerieSymbol`的`gap`参数控制图形标记的外留白距离
-* (2020.01.26) 增加`TextLimit`组件可以设置`AxisLabel`的文本自适应
-* (2020.01.20) 优化`Tooltip`设置`itemFormatter`时显示系列颜色
-* (2020.01.20) 增加`Radar`雷达图在`inspector`配置`areaStyle`的支持
-
-## v1.2.0
-
-* (2020.01.15) 发布`v1.2.0`版本
-* (2020.01.15) 增加`AxisLabel`格式化为整数的支持（`{value:f0}`）
-* (2020.01.15) 增加折线图对数轴`Log`的支持
-* (2020.01.09) 修复当设置`DataZoom`的`minShowNum`时可能异常的问题
-* (2020.01.08) 修复当设置`AxisLine`的`onZero`时刻度显示异常的问题
-* (2020.01.08) 增加`Mask`遮罩遮挡支持
-* (2019.12.21) 增加`Tooltip`的单个数据项和标题的字符串模版格式器
-* (2019.12.21) 增加`DataZoom`的最小显示数据个数`minShowNum`
-* (2019.12.20) 增加`Demo40_Radar.cs`雷达图代码操作`Demo`
-* (2019.12.20) 添加`RadarChart`相关API接口
-
-## v1.1.0
-
-* (2019.12.17) 发布`v1.1.0`版本
-* (2019.12.16) 修复`Overlay`模式下不显示`Tooltip`的问题
-* (2019.12.15) 增加`Title`的`TextStyle`支持
-* (2019.12.11) 修复`Legend`都隐藏时`Value轴`还显示数值的问题
-* (2019.12.11) 修复`Series->Data->Size`重置为0后设置无效的问题
-* (2019.12.06) 修复数据过小时`AxisLabel`直接科学计数法显示的问题
-* (2019.12.04) 优化和完善数据更新`UpdateData`接口
-* (2019.12.03) 增加圆环饼图的圆角支持，参数：`serie.arcShaped`
-* (2019.12.03) 增加数据更新动画,参数：`serie.animation.dataChangeEnable`
-* (2019.11.30) 增加`GaugeChart`仪表盘
-* (2019.11.22) 修复`BarChart`清空数据重新赋值后`SerieLabel`显示异常的问题
-* (2019.11.16) 修复`SerieLabel`设置`color`等参数不生效的问题
-
-## v1.0.5
-
-* (2019.11.12) 发布`v1.0.5`版本
-* (2019.11.12) 修复`2018.3`以下版本打开项目报错的问题
-* (2019.11.12) 增加`IconStyle`子组件，优化`SerieData`的图标配置
-* (2019.11.11) 修复`Serie`的图标显示在上层遮挡`Label`的问题
-* (2019.11.11) 修复饼图当数据过小时视觉引导线会穿透的的问题
-* (2019.11.09) 修复饼图添加数据时`Label`异常的问题
-* (2019.11.09) 优化结构，分离为`XCharts`和`XChartsDemo`两部分
-
-## v1.0.4
-
-* (2019.11.05) 发布`v1.0.4`版本
-* (2019.11.05) 增加`Radar`雷达组件文本样式参数配置支持
-* (2019.11.04) 修复`Unity2018.3`以下版本代码不兼容的问题
-* (2019.11.04) 优化`SerieLabel`过多时引起的性能问题
-
-## v1.0.3
-
-* (2019.11.03) 发布`v1.0.3`版本
-* (2019.11.03) 增加`Editor`快捷添加图表：`Hierarchy`试图下右键`XCharts->LineChart`
-* (2019.11.02) 优化非配置参数变量命名和访问权限，简化`API`
-
-## v1.0.2
-
-* (2019.10.31) 发布`v1.0.2`版本
-* (2019.10.31) 修复`prefab`预设制作报错的问题
-* (2019.10.31) 增加访问主题组件API：`BaseChart.theme`
-
-## v1.0.1
-
-* (2019.10.26) 发布`v1.0.1`版本
-* (2019.10.26) 修复版本检查功能在非运行时异常的问题
-* (2019.10.26) 增加科学计数法显示数值的支持（查阅`forceENotation`参数）
-* (2019.10.26) 增加`Axis`类目轴数据为空时的默认显示支持
-* (2019.10.26) 增加`Axis`数值轴的最大最小值可设置为小数的支持，优化极小数图表的表现效果
-
-## v1.0.0
-
-* (2019.10.25) 发布`v1.0.0`版本
-* (2019.10.23) 增加版本检测功能：`Component -> XCharts -> Check For Update`
-* (2019.10.22) 增加`Package Manager`安装的支持
-* (2019.10.20) 增加`Demo`首页`BarChart`的代码动态控制效果
-* (2019.10.18) 增加`Serie`的`barType`参数，可配置`斑马柱状图`
-* (2019.10.18) 增加`Serie`的`barPercentStack`参数，可配置`百分比堆叠柱状图`
-* (2019.10.16) 增加`Demo`首页`LineChart`的代码动态控制效果
-* (2019.10.15) 移除`Pie`组件，相关参数放到`Settings`中配置
-* (2019.10.15) 增加`Demo`首页，展示代码动态控制效果
-* (2019.10.14) 增加`RadarChart`、`ScatterChart`和`HeatmapChart`的起始动画效果
-* (2019.10.14) 增加`SerieData`的`radius`自定义数据项的半径
-* (2019.10.14) 增加`HeatmapChart`热力图
-* (2019.10.14) 增加`VisualMap`视觉映射组件
-* (2019.10.14) 增加`ItemStyle`数据项样式组件
-* (2019.10.14) 增加`Emphasis`高亮样式组件
-* (2019.10.10) 增加`Settings`全局参数配置组件，开放更多参数可配置
-* (2019.10.09) 增加`AreaStyle`的高亮相关参数配置鼠标悬浮时高亮之前区域
-* (2019.10.09) 优化`DataZoom`组件，增加双指缩放
-* (2019.10.05) 增加`SerieLabel`的`LineType`给饼图配置不同类型的视觉引导线
-* (2019.10.02) 增加`ScatterChart`同时对`Scatter`和`Line`的支持，实现折线图和散点图的组合图
-* (2019.10.01) 重构代码，废弃`Series.series`接口，用`Series.list`代替
-* (2019.10.01) 增加`customDrawCallback`自定义绘制回调
-* (2019.10.01) 增加`SmoothDash`平滑虚线的支持
-* (2019.09.30) 增加`Serie`采样类型`sampleType`的相关配置
-* (2019.09.29) 增加`SerieSymbol`关于显示间隔的相关配置
-* (2019.09.29) 重构代码：
-  * `BaseChart`的`sampleDist`删除，`Serie`增加`lineSampleDist`
-  * `BaseChart`的`minShowDataNumber`删除，`Serie`增加`minShow`
-  * `BaseChart`的`maxShowDataNumber`删除，`Serie`增加`maxShow`
-  * `BaseChart`的`maxCacheDataNumber`删除，`Serie`增加`maxCache`
-  * `BaseChart`的`AddSerie()`接口参数调整
-  * `BaseChart`的`UpdateData()`接口参数调整
-  * `Axis`增加`maxCache`
-* (2019.09.28) 增加`LineChart`和`BarChart`同时对`Line`、`Bar`类型`Serie`的支持，实现折线图和柱状图的组合图
-* (2019.09.27) 增加`Axis`的`splitNumber`设置为`0`时表示绘制所有类目数据
-* (2019.09.27) 增加`SampleDist`采样距离的配置，对过密的曲线开启采样，优化绘制效率
-* (2019.09.27) 增加`XCharts问答`、`XChartsAPI接口`、`XCharts配置项手册`等文档
-* (2019.09.26) 增加`AnimationReset()`重置初始化动画接口
-* (2019.09.26) 优化`LineChart`的密集数据的曲线效果
-* (2019.09.25) 优化`SerieData`的自定义图标不与`SerieLabel`关联，可单独控制是否显示
-* (2019.09.24) 增加`SerieData`的自定义图标相关配置支持
-* (2019.09.23) 增加`Formatter`配置`Axis`的`AxisLabel`的格式化输出
-* (2019.09.23) 增加`Tooltip`的`FontSize`、`FontStyle`配置字体大小和样式
-* (2019.09.23) 增加`Formatter`配置`SerieLabel`、`Legend`、`Tooltip`的格式化输出
-* (2019.09.19) 增加`LineArrow`配置带箭头曲线
-* (2019.09.19) 增加`Tooltip`的`FixedWidth`、`FixedHeight`、`MinWidth`、`MinHeight`设置支持
-* (2019.09.18) 增加单条堆叠柱状图
-* (2019.09.18) 增加虚线`Dash`、点线`Dot`、点划线`DashDot`、双点划线`DashDotDot`等类型的折线图支持
-* (2019.09.17) 增加`AnimationEnabel()`启用或取消起始动画接口
-* (2019.09.17) 增加`Axis`的`Interval`强制设置坐标轴分割间隔
-* (2019.09.16) 去掉`Serie`中的旧版本数据兼容，不再支持`xData`和`yData`
-* (2019.09.06) 增加`Animation`在重新初始化数据时自启动功能
-* (2019.09.06) 增加`SerieLabel`的`Border`边框相关配置支持
-* (2019.09.05) 增加`PieChart`的`Animation`初始化动画配置支持
-* (2019.09.03) 增加`BarChart`的`Animation`初始化动画配置支持
-* (2019.09.02) 增加`LineChart`的`Animation`初始化动画配置支持
-* (2019.08.22) 增加`AxisName`的`Offset`偏移配置支持
-* (2019.08.22) 增加`AxisLine`的`Width`配置支持
-* (2019.08.20) 增加`SerieLabel`的背景宽高、文字边距、文字旋转的配置
-* (2019.08.20) 增加`BarChart`的`Label`配置支持
-* (2019.08.15) 增加`LineChart`的`Label`配置
-* (2019.08.15) 重构`BarChart`，移除`Bar`组件，相关参数统一放到`Serie`中配置
-* (2019.08.15) 重构`LineChart`，移除`Line`组件，相关参数统一放到`Serie`中配置
-
-## v0.8.3
-
-* (2019.08.15) 发布`v0.8.3`版本
-* (2019.08.14) 修复`PieChart`的`Label`无法自动更新的问题
-* (2019.08.13) 修复`UpdateData`接口无法更新数据的问题
-* (2019.08.07) 增加`SerieSymbol`的`Color`、`Opacity`配置
-
-## v0.8.2
-
-* (2019.08.07) 发布`v0.8.2`版本
-* (2019.08.07) 修复区域平滑折线图显示异常的问题
-* (2019.08.06) 修复`serie`系列数超过调色盘颜色数时获取的颜色异常的问题
-* (2019.08.06) 修复当`Axis`的`minMaxType`为`Custom`时`max`设置为`100`不生效的问题
-
-## v0.8.1
-
-* (2019.08.04) 发布`v0.8.1`版本
-* (2019.08.04) 修复`Inspector`中修改数据不生效的问题
-
-## v0.8.0
-
-* (2019.08.04) 发布`v0.8.0`版本
-* (2019.08.04) 优化`RadarChart`雷达图，增加多雷达图支持
-* (2019.08.01) 增加代码API注释文档，整理代码
-* (2019.07.29) 增加`Radius`、`Area`两种南丁格尔玫瑰图展示类型
-* (2019.07.29) 增加`SerieLabel`配置饼图标签，支持`Center`、`Inside`、`Outside`等显示位置
-* (2019.07.28) 增加`PieChart`多饼图支持
-* (2019.07.23) 优化`Theme`主题的自定义，切换主题时自定义配置不受影响
-* (2019.07.22) 增加`EffectScatter`类型的散点图
-* (2019.07.21) 增加`ScatterChart`散点图
-* (2019.07.21) 增加`SerieData`支持多维数据配置
-* (2019.07.20) 增加`Symbol`配置`Serie`标志图形的显示
-* (2019.07.19) 增加用代码添加动态正弦曲线的示例`Demo11_AddSinCurve`
-* (2019.07.19) 优化`Legend`的显示和控制
-* (2019.07.18) 优化抗锯齿，曲线更平滑
-* (2019.07.18) 增加`Tooltip`指示器类型，优化显示控制
-* (2019.07.15) 增加`Size`设置图表尺寸
-* (2019.07.14) 增加`二维数据`支持，XY轴都可以设置为数值轴
-* (2019.07.13) 增加`双坐标轴`支持，代码改动较大
-
-## v0.5.0
-
-* (2019.07.10) 发布`v0.5.0`版本
-* (2019.07.09) 增加`AxisLine`配置坐标轴轴线和箭头
-* (2019.07.03) 增加`AxisLabel`配置坐标轴`刻度标签`
-* (2019.07.02) 增加`selected`等相关参数配置`PieChart`的选中效果
-* (2019.06.30) 增加`SplitArea`配置坐标轴`分割区域`
-* (2019.06.29) 增加`AxisName`配置坐标轴`名称`
-* (2019.06.20) 增加`AreaAlpha`控制`RadarChart`的`Area`透明度
-* (2019.06.13) 增加`DataZoom`实现`区域缩放`
-* (2019.06.01) 增加`stepType`实现`LineChart`的`阶梯线图`
-* (2019.05.29) 增加`InSameBar`实现`BarChart`的`非堆叠同柱`
-* (2019.05.29) 增加`crossLabel`控制`Tooltip`的`十字准星指示器`
-* (2019.05.24) 增加`堆叠区域图`
-* (2019.05.16) 增加`AxisMinMaxType`控制坐标轴最大最小刻度
-* (2019.05.15) 完善数据接口
-* (2019.05.14) 增加X轴`AxisType.Value`模式支持
-* (2019.05.13) 增加负数数值轴支持
-* (2019.05.11) 增加自定义`Editor`编辑
-* (2019.03.21) 增加`Tooltip`
-* (2018.11.01) 增加`Default`、`Light`、`Dark`三种默认主题
-
-## v0.1.0
-
-* (2018.09.05) 发布`v0.1.0`版本
--- a/CHANGELOG.md.meta
+++ b/CHANGELOG.md.meta
@@ -1,7 +0,0 @@
-fileFormatVersion: 2
-guid: e66d91d4c396b46bf87034c47ca3b43d
-TextScriptImporter:
-  externalObjects: {}
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/CHANGELOG-EN.md
+++ b/Documentation/CHANGELOG-EN.md
@@ -1,548 +0,0 @@
-
-# 更新日志
-
-[master](#master)  
-[v2.3.0](#v2.3.0)  
-[v2.2.3](#v2.2.3)  
-[v2.2.2](#v2.2.2)  
-[v2.2.1](#v2.2.1)  
-[v2.2.0](#v2.2.0)  
-[v2.1.1](#v2.1.1)  
-[v2.1.0](#v2.1.0)  
-[v2.0.1](#v2.0.1)  
-[v2.0.0](#v2.0.0)  
-[v2.0.0-preview.2](#v2.0.0-preview.2)  
-[v2.0.0-preview.1](#v2.0.0-preview.1)  
-[v1.6.3](#v1.6.3)  
-[v1.6.1](#v1.6.1)  
-[v1.6.0](#v1.6.0)  
-[v1.5.2](#v1.5.2)  
-[v1.5.1](#v1.5.1)  
-[v1.5.0](#v1.5.0)  
-[v1.4.0](#v1.4.0)  
-[v1.3.1](#v1.3.1)  
-[v1.3.0](#v1.3.0)  
-[v1.2.0](#v1.2.0)  
-[v1.1.0](#v1.1.0)  
-[v1.0.5](#v1.0.5)  
-[v1.0.4](#v1.0.4)  
-[v1.0.3](#v1.0.3)  
-[v1.0.2](#v1.0.2)  
-[v1.0.1](#v1.0.1)  
-[v1.0.0](#v1.0.0)  
-[v0.8.3](#v0.8.3)  
-[v0.8.2](#v0.8.2)  
-[v0.8.1](#v0.8.1)  
-[v0.8.0](#v0.8.0)  
-[v0.5.0](#v0.5.0)  
-[v0.1.0](#v0.1.0)  
-
-## master
-
-* (2021.08.15) Fixed the problem of displaying exceptions after adding data again when `DataZoom` is enable (#163)
-* (2021.08.15) Improved `Axis`'s `AxisLabel` text rotate setting to avoid inconsistency offset in `DataZoom` (#163)
-* (2021.08.14) Added `Legend`'s `textAutoColor` to set the text color match with `Serie` color (#163)
-* (2021.08.12) Optimize `BarChart` setting `Corner` when the positive and negative columns are fillet symmetric
-* (2021.08.03) Fixed y axis not displaying when all data is 0
-* (2021.07.29) Fixed ignored data will also participate in calculations when `ignore` is enabled (#161)
-* (2021.07.29) Improved `BarChart`'s `Zebra` gradient support
-* (2021.07.26) Fixed issue where `XCharts` path could not be found when `TextMeshPro Enable` (#160)
-
-## v2.3.0
-
-### Main points
-
-* Data store upgraded from `float` to `double`
-* Added `MarkLine`
-* `Serie` can use `IconStyle` to configure ICONS uniformly
-* `Label` supports custom display styles with code
-* `DataZoom` is perfect
-* `PieChart` optimization
-* Problem fixes
-
-### Upgrade Note
-
-Since the data type is upgraded to `double`, the implicit conversion of `float` to `double` may have precision problems, so it is recommended that all previous data types of `float` be manually changed to `double`.
-
-### Details
-
-* (2021.07.24) Release `v2.3.0` version
-* (2021.07.22) Improved `SerieSymbol` to support `PictorialBarchart` extension
-* (2021.07.19) Fixed issue where `Tooltip` was not displayed on `WdbGL` platform
-* (2021.07.18) Added `iconStyle` for serie
-* (2021.07.15) Added `MarkLine` (#142)
-* (2021.07.09) Optimize `BarChart` to set whether to show bars via `seriedata.show`
-* (2021.07.08) Optimize data storage type from `float` to `double`
-* (2021.07.05) Fixed `Piechart` `avoidLabelOverlap` parameter not working
-* (2021.07.04) Fixed incorrect mouse area indication after `PieChart` selected sector
-* (2021.07.04) Optimize when the `Label` of `PieChart` is `Inside`, the offset can be adjusted by the parameter `Margin`
-* (2021.07.01) Added `DataZoom` arguments to `supportInsideScroll` and `supportInsideDrag` to set whether scrolling and dragging are supported in the coordinate system
-* (2021.06.27) Add `showStartLabel` and `showEndLabel` arguments to `AxisLabel` to set whether the `Label` should be displayed at the beginning and end of the `AxisLabel`
-* (2021.06.27) Added `formatter` delegate method to `AxisLabel` and `SerieLabel` (#145)
-* (2021.06.27) Added `DataZoom`'s `orient` parameter to set horizontal or vertical styles
-* (2021.06.21) Added `iconStyle`'s `AutoHideWhenLabelEmpty` to set whether the icon is automatically hidden when `label` is empty
-
-# # v2.2.3
-
-* (2021.06.20) Release `v2.2.3` version
-* (2021.06.20) Fixed the default display of `Icon` in `Axis`
-
-## v2.2.2
-
-* (2021.06.18) Release `v2.2.2` version
-* (2021.06.18) Optimize `Axis` to automatically hide `Icon` when `Label` is empty
-* (2021.06.17) Fixed an issue where `maxCache` was set to one more number of actual data
-* (2021.06.17) Fixed an issue where `TextMeshPro` could not be opened and closed in time to refresh
-* (2021.06.17) Fixed an issue where `XCharts` always pops up when importing `XCharts`
-
-## v2.2.1
-
-* (2021.06.13) Release `v2.2.1` version
-* (2021.06.13) Improved support for multiple screens
-* (2021.06.12) Added `iconStyle` `align` parameter to set the horizontal alignment of the icon
-* (2021.06.12) Improve `Theme` import (#148)
-* (2021.06.10) Fixed compatibility issues with `Unity` version (#154)
-* (2021.06.05) Improved Candlestickchart support for inverse (#152)
-* (2021.06.04) Fixed `Gauge` having an abnormal pointer position when the minimum value is negative (#153)
-
-## v2.2.0
-
-* (2021.05.30) Release `v2.2.0` version
-* (2021.05.25) Improved `TextStyle` support for `alignment`
-* (2021.05.24) Fixed the problem that `Label` could not display properly when `PieChart` data were all `0`
-* (2021.05.24) Fixed an issue where `Serie Name` was not working on the `Add Serie` panel (#149)
-* (2021.05.23) Added `TextStyle` `autoWrap` to set whether to wrap lines
-* (2021.05.23) Added `TextStyle` `autoAlign` whether to set alignment automatically
-* (2021.05.23) Added `width` and `height` of `axisLabel` to support custom text length and width
-* (2021.05.23) Added `Axis` `iconStyle` and `icons` to support setting coordinate Axis labels to display icons
-* (2021.05.20) Added the `insertDataHead` parameter to `Serie` and `Axis` to control whether data is inserted into the head or tail
-* (2021.05.18) Optimize chart creation under `Editor` #147
-* (2021.05.16) Pull out the `Ganttchart` chart and provide it as an extension module
-* (2021.05.11) Added support for `VisualMap` to set color by `Piecewise`
-* (2021.05.09) Fixed an issue where `RingChart` could not set the background color of the ring  #141
-* (2021.05.08) Added `Liquidchart` support for `Rect` shape
-* (2021.05.07) Improved the `Axis` scale performance #135
-* (2021.05.01) Added `Settings` parameters for painter's material #140
-* (2021.05.01) Fixed an issue where some super large or super small values could not be properly represented
-* (2021.04.29) Fixed an issue with `Radar` switching to `Circle` anomaly #139
-* (2021.04.29) Added `Settings`'s `reversePainter` to set whether or not `Serie` is drawn in reverse order
-* (2021.04.28) Fixed bug where `AxisLabel` displayed incorrectly with `DataRoom` (#138)
-* (2021.04.26) Fixed dynamically creating chart at runtime would be abnormal #137
-* (2021.04.26) Added support for `Barchart` to draw gradient borders
-* (2021.04.23) Added support for custom charts
-* (2021.04.22) Fixed bug where `Gauge` `axisLabel`'s text color could not be adjusted
-* (2021.04.13) Add the `ShowStarttick` and '`ShowEndTick` parameters of 'AxisTick' to control whether the first and last ticks are displayed
-* (2021.04.13) Improved multi-axis support #132
-
-## v2.1.1
-
-* (2021.04.13) Define the code and clear `Warning`
-* (2021.04.13) Fixed compatibility issues with `Unity` version
-* (2021.04.12) Fixed problem `missing class attribute 'ExtensionOfNativeClass'` after Theme refactoring #131
-
-## v2.1.0
-
-* (2021.04.07) Release `v2.1.0` version
-* (2021.03.31) Optimized and refactor `Theme` to solve problems with the same or missing references #118
-* (2021.03.30) Optimized `Tooltip` to support setting different category axis data #129
-* (2021.03.29) Optimized the custom draw callback API
-* (2021.03.25) Added `Ganttchart`
-* (2021.03.22) Added `Theme` `Unbind` button to unbind theme when copying chart #118
-* (2021.03.18) Fixed an issue where the check box after `Foldout` in `Inspector` could not be checked
-* (2021.03.18) Fixed an issue with `BarChart` displaying an exception in the `0` value
-* (2021.03.14) Fixed `Tooltip` indicator was not indicating the correct location in some cases
-* (2021.03.13) Optimized the editing experience and component refresh after `MulticomponentMode` is enabled #128
-* (2021.03.10) Added `CandlestickChart` #124
-* (2021.03.06) Added `PieChart`'s `minAngle` parameter to support setting minimum sector angle #117
-* (2021.03.05) Added support for `Legend` for several built-in ICONS #90
-* (2021.03.02) Added `DataRoom` support for value axes #71
-* (2021.03.02) Optimized `TextMeshPro` compatibility issue #125
-* (2021.03.01) Fixed display exception of hidden gameObjects when enabling and disabling a chart #125
-
-## v2.0.1
-
-* (2021.02.26) Fixed incorrect position of `Tooltip` in `HeatmapChart` #123
-* (2021.02.22) Fixed compatibility issues with `Unity` version
-* (2021.02.21) Added `Tooltip` parameter `ignoreDataShow`
-* (2021.02.19) Fixed an issue where charts could appear abnormal when under `LayoutGroup` control #121
-* (2021.02.18) Fixed an issue where the `Radar` could not refresh itself after parameter changing #122
-
-## v2.0.0
-
-* (2021.02.05) Release `v2.0.0` version
-* (2021.02.03) Fixed an issue where `Axisline` `OnZero` did not work on `YAxis` #116
-* (2021.01.29) Fixed incorrect display of `Tick` on `Category` axis when `BoundaryGap` and `alignWithLabel` are `True` #115
-* (2021.01.25) Optimized some details
-* (2021.01.22) Fixed a `Inpsector` displayed error
-
-## v2.0.0-preview.2
-
-* (2021.01.21) Release `v2.0.0-preview.2` version
-* (2021.01.21) Fixed an error about `AxisTick` in `Inpsector`
-* (2021.01.21) Fixed a build compatibility error
-* (2021.01.19) Added `XChartsSettings` `editorShowAllListData` parameter to configure whether to display all the list's data in Inspector
-
-## v2.0.0-preview.1
-
-* (2021.01.19) Release `v2.0.0-preview.1` version
-
-## v1.6.3
-
-* (2021.01.02) Release `v1.6.3` version
-* (2020.12.18) fixed an issue where updating data when `Animation` was not enabled caused the chart to keep refreshing
-* (2020.12.01) fixed an issue where a newly created chart on `Unity2020` could not be drawn properly
-
-## v1.6.2
-
-* (2020.11.22) Release `v1.6.2` version
-* (2020.11.22) Fixed an issue where `LineChart` draws an exception when the data is too dense #99
-* (2020.11.21) Fixed an issue where the scale position of `LineChart` could be abnormal if `alignWithLabel` was `true`
-* (2020.11.21) Fixed `Unity5` compatibility error reporting problem
-* (2020.11.13) Improved `RadarChart` `Indicator` support for `\n` line feed
-* (2020.11.12) Fixed `LineChart` reporting errors when the type was `Smooth` when the data was too secure #100
-* (2020.10.22) Optimized the support of `VisualMap` for `Piecewise` in `HeatmapChart`
-* (2020.09.22) Fixed `PieChart` inconsistent border size
-* (2020.09.18) Added `Remove All Chart Object` to Remove All child nodes under the Chart (automatically reinitialized)
-* (2020.09.18) Fixed `SerieLabel` also displayed after hided `Serie` by clicked the legend #94
-* (2020.09.18) Optimized coordinate axis calibration and text display #93
-* (2020.09.17) Fixed `Package` import missing `meta` file causing failure #92
-* (2020.09.08) Optimized the color of `Legend` to automatically match the custom color of `ItemStyle`
-* (2020.09.05) Optimized `LineChart` to display `XAxis1` without using `XAxis1`.
-* (2020.08.29) Added `toColor` and `toColor2` of `LineStyle` to set the horizontal gradient of `LineChart`. Cancel `ItemStyle` to set the horizontal gradient of `LineChart`.
-* (2020.08.29) Added the `onPointerClickPie` of `PieChart`, a callback function of click pie area.
-* (2020.08.29) Added the `onPointerClickBar` of `BarChart`, a callback function of click bar.
-
-## v1.6.0
-
-* (2020.08.24) Release `v1.6.0` version
-* (2020.08.23) Refactor code, replace `Color` with `Color32` for reduce implicit conversion (Can cause custom colors to lose, reference [Q&A 29](https://github.com/XCharts-Team/XCharts/blob/master/Assets/XCharts/Documentation/XChartsFQA-ZH.md) to upgrade)
-* (2020.08.15) Optimized `PieChart` drawing performance effect #85
-* (2020.08.11) Added `LiquidChart` data change animation#83
-* (2020.08.11) Optimized `PieChart` text stack and lead line effects#85
-* (2020.08.08) Optimized `LineChart` the rendering performance of dense data
-* (2020.07.30) Added `LineChart` to configure gradient through `VisualMap` or `ItemStyle`#78
-* (2020.07.25) Fixed a problem with `LineChart` emerging abnormal in animation drawing#79
-* (2020.07.25) Fixed a problem with gradual discoloration on `LiquidChart` at `100%`#80
-* (2020.07.25) Added `RadarChart` support for `formatter` of `Tooltip`#77
-* (2020.07.23) Added `RingChart` ring gradient support#75
-* (2020.07.21) Added `formatter` of `AxisLabel` and `SerieLabel` to configure numeric formatting separately.
-* (2020.07.17) Added animation completion callback interface for `SerieAnimation`.
-* (2020.07.17) Optimized `Chart` under `ScrollView` without affecting the scrolling and dragging of `ScrollView`.
-* (2020.07.16) Fixed a problem with `Tooltip` that would also show up if it was blocked on top. #74
-* (2020.07.07) Fixed issue where  `SerieLabel` position was out of order
-* (2020.07.07) Added `Tooltip` to the `offset` parameter
-* (2020.07.06) Added `Liquidchart`
-* (2020.07.01) Added `PolarChart`
-
-## v1.5.2
-
-* (2020.06.25) Fixed an issue where `BarChart` would draw a small number of bars when the value was  `0`
-* (2020.06.24) Fixed an issue where `PieChart` was drawing abnormally after setting `Clockwise` #65
-* (2020.06.23) Optimized the drawing effect of `LineChart` when the difference between peak and valley is too large #64
-* (2020.06.18) Fixed an issue where `SerieLabel` might not be displayed when adding data again
-* (2020.06.17) Added `SerieData` to `serieSymbol` #66
-* (2020.06.17) Fixed `Check For Update` bug in `Unity 2018` version #63
-* (2020.06.16) Added `Serie` `avoidLabelOverlap` parameter to avoid pie chart TAB stacking #56
-* (2020.06.15) Fixed an issue where the `SerieLabel` control display could be deranged
-* (2020.06.11) Fixed `Check warning` not working
-* (2020.06.11) Fixed issue where `Piechart` and `Ringchart` were not displayed when data fraction was very small
-* (2020.06.11) Added `Tooltip` to `titleFormatter` to support configuration placeholder `{i}` to ignore not showing titles
-* (2020.06.07) Added `customFadeInDelay` and other custom data item delay and duration callback function #58
-* (2020.06.07) Optimized `Piechart` to display equal parts when all the data are `0` #59
-* (2020.06.04) Added `autoOffset` parameter setting for `SerieLabel` to determine whether the up and down offset is automatically determined
-* (2020.06.04) Added `Tooltip` to `AlwayShow` parameter setting to always show after triggering
-* (2020.06.04) Tooltip's `formatter` supports `{.1}` wildcards
-* (2020.06.04) Optimizes the number of `Legend` to automatically wrap to display #53
-
-## v1.5.1
-
-* (2020.06.03) 发布`v1.5.1`版本
-* (2020.06.02) 增加`Radar`的`ceilRate`，设置最大最小值的取整倍率
-* (2020.06.02) 优化`Tooltip`的`formatter`，支持`{c1:1-1:f1}`格式配置
-* (2020.05.31) 优化`Background`组件的生效条件，需要有单独的父节点（升级前需要自己处理旧的背景节点）
-* (2020.05.30) 优化`PieChart`支持设置`ignoreValue`不显示指定数据
-* (2020.05.30) 修复`RadarChart`为`Circle`时不绘制`SplitArea`的问题
-* (2020.05.30) 优化`RadarChart`在设置`max`为`0`时可自动刷新最大值
-* (2020.05.29) 修复`PieChart`设置`gap`时只有一个数据时绘制异常的问题
-* (2020.05.27) 修复调用`UpdateDataName()`接口时不会自动刷新的问题
-* (2020.05.27) 优化`柱状图`的渐变色效果
-* (2020.05.24) 修复`Axis`同时设置`boundaryGap`和`alignWithLabel`时`Tick`绘制异常的问题
-* (2020.05.24) 优化版本更新检测
-* (2020.06.25) release `v1.5.2`
-
-
-## v1.5.0
-
-* (2020.05.22) 发布`v1.5.0`版本
-* (2020.05.21) 增加`圆角柱图`支持渐变
-* (2020.05.21) 增加`Background`背景组件
-* (2020.05.19) 隐藏`Hierarchy`试图下自动生成的子节点
-* (2020.05.18) 增加`chartName`属性可指定图表的别称，可通过`XChartMgr.Instance.GetChart(chartName)`获取图表
-* (2020.05.16) 增加部分鼠标事件回调
-* (2020.05.15) 优化自带例子，`Demo`改名为`Example`
-* (2020.05.13) 增加`Serie`的`large`和`largeThreshold`参数配置折线图和柱状图的性能模式
-* (2020.05.13) 完善Demo，增加性能演示Demo
-* (2020.05.13) 优化性能，优化大数据绘制，重构代码
-* (2020.05.04) 增加`numericFormatter`参数可配置数值格式化显示，去掉`forceENotation`参数
-* (2020.04.28) 增加`自由锚点`支持，任意对齐方式
-* (2020.04.23) 优化`ScatterChart`的`Tooltip`显示效果
-* (2020.04.23) 增加`Tooltip`的`formatter`对`{.}`、`{c:0}`、`{c1:1}`的支持
-* (2020.04.19) 优化`LineChart`折线图的区域填充渐变效果
-* (2020.04.19) 增加`AxisLabel`的`onZero`参数可将`Label`显示在`0`刻度上
-* (2020.04.19) 增加`Serie`和`AxisLabel`的`showAsPositiveNumber`参数将负数数值显示为正数
-* (2020.04.18) 增加`Covert XY Axis`互换XY轴配置
-* (2020.04.17) 增加`Axis`可通过`inverse`参数设置坐标轴反转
-* (2020.04.16) 修复`Check warning`在`Unity2019.3`上的显示问题
-* (2020.04.16) 修复`PieChart`在设置`Space`参数后动画绘制异常的问题
-
-## v1.4.0
-
-* (2020.04.11) 发布`v1.4.0`版本
-* (2020.04.11) 增加`Check warning`检测功能
-* (2020.04.09) 修复`Legend`初始化异常的问题
-* (2020.04.08) 增加`PieChart`通过`ItemStyle`设置边框的支持
-* (2020.03.29) 增加`Axis`的`ceilRate`设置最大最小值的取整倍率
-* (2020.03.29) 增加`BarChart`可通过`itemStyle`的`cornerRadius`设置`圆角柱图`
-* (2020.03.29) 增加`itemStyle`的`cornerRadius`支持圆角矩形
-* (2020.03.24) 优化`Editor`参数编辑，兼容`Unity2019.3`及以上版本
-* (2020.03.24) 增加`Serie`在`inspector`上可进行调整顺序、添加和删除操作
-* (2020.03.23) 修复`Title`的`textStyle`和`subTextStyle`无效的问题
-* (2020.03.22) 增加`BarChart`通过`barType`参数设置`胶囊柱状图`
-* (2020.03.21) 增加`BarChart`和`HeatmapChart`可通过`ignore`参数设置忽略数据的支持
-* (2020.03.21) 增加`ItemStyle`的`tooltipFormatter`参数可单独配置`Serie`的`Tooltip`显示
-* (2020.03.20) 修复`X Axis 1`和`Y Axis 1`配置变更时不会自动刷新的问题
-* (2020.03.20) 增加`AxisTick`的`width`参数可单独设置坐标轴刻度的宽度
-* (2020.03.20) 增加`Serie`的`radarType`参数设置`多圈`和`单圈`雷达图
-* (2020.03.17) 增加`BarChart`可用`ItemStyle`的`backgroundColor`设置数据项背景颜色
-* (2020.03.17) 增加`SerieData`的`ItemStyle`和`Emphasis`可单独配置数据项样式的支持
-* (2020.03.15) 重构`EmptyCricle`类型的`Symbol`边宽取自`ItemStyle`的`borderWidth`参数
-* (2020.03.15) 重构`SerieSymbol`，去掉`color`和`opacity`参数，取自`ItemStyle`
-
-## v1.3.1
-
-* (2020.03.14) 发布`v1.3.1`版本
-* (2020.03.14) 修复`LineChart`开启`ingore`时部分数据可能绘制异常的问题
-* (2020.03.13) 修复`LineChart`的`label`偏移显示异常的问题
-
-## v1.3.0
-
-* (2020.03.11) 发布`v1.3.0`版本
-* (2020.03.11) 优化`LineChart`的`label`偏移显示
-* (2020.03.11) 优化清空并重新添加数据后的自动刷新问题
-* (2020.03.10) 增加`LineChart`的普通折线图可通过`ignore`参数设置忽略数据的支持
-* (2020.03.09) 增加`BarChart`可通过`ItemStyle`配置边框的支持
-* (2020.03.08) 增加`RingChart`环形图
-* (2020.03.05) 调整`Serie`的`arcShaped`参数重命名为`roundCap`
-* (2020.03.05) 增加运行时和非运行时参数变更自动刷新图表
-* (2020.02.26) 重构`Legend`图例，改变样式，增加自定义图标等设置
-* (2020.02.23) 增加`BaseChart.AnimationFadeOut()`渐出动画，重构动画系统
-* (2020.02.13) 增加`BaseChart.RefreshTooltip()`接口立即重新初始化`Tooltip`组件
-* (2020.02.13) 增加`Tooltip`的`textStyle`参数配置内容文本样式，去掉`fontSize`和`fontStyle`参数
-* (2020.02.13) 增加`TextStyle`的`lineSpacing`参数配置行间距
-* (2020.02.11) 增加`Radar`的`splitLine`参数配置分割线，去掉`lineStyle`参数
-* (2020.02.11) 增加`Tooltip`的`backgroundImage`参数配置背景图
-* (2020.02.11) 增加`Tooltip`的`paddingLeftRight`和`paddingTopBottom`参数配置文字和边框的间距
-* (2020.02.11) 增加`Tooltip`的`lineStyle`参数配置指示线样式
-* (2020.02.11) 增加`Axis`的`splitLine`参数控制分割线，去掉`showSplitLine`和`splitLineType`参数（更新时需要重新设置分割线相关设置）
-* (2020.02.10) 增加`Serie`的`clip`参数控制是否超出坐标系外裁剪（只适用于折线图、柱状图、散点图）
-* (2020.02.08) 增加`SerieSymbol`的`gap`参数控制图形标记的外留白距离
-* (2020.01.26) 增加`TextLimit`组件可以设置`AxisLabel`的文本自适应
-* (2020.01.20) 优化`Tooltip`设置`itemFormatter`时显示系列颜色
-* (2020.01.20) 增加`Radar`雷达图在`inspector`配置`areaStyle`的支持
-
-## v1.2.0
-
-* (2020.01.15) 发布`v1.2.0`版本
-* (2020.01.15) 增加`AxisLabel`格式化为整数的支持（`{value:f0}`）
-* (2020.01.15) 增加折线图对数轴`Log`的支持
-* (2020.01.09) 修复当设置`DataZoom`的`minShowNum`时可能异常的问题
-* (2020.01.08) 修复当设置`AxisLine`的`onZero`时刻度显示异常的问题
-* (2020.01.08) 增加`Mask`遮罩遮挡支持
-* (2019.12.21) 增加`Tooltip`的单个数据项和标题的字符串模版格式器
-* (2019.12.21) 增加`DataZoom`的最小显示数据个数`minShowNum`
-* (2019.12.20) 增加`Demo40_Radar.cs`雷达图代码操作`Demo`
-* (2019.12.20) 添加`RadarChart`相关API接口
-
-## v1.1.0
-
-* (2019.12.17) 发布`v1.1.0`版本
-* (2019.12.16) 修复`Overlay`模式下不显示`Tooltip`的问题
-* (2019.12.15) 增加`Title`的`TextStyle`支持
-* (2019.12.11) 修复`Legend`都隐藏时`Value轴`还显示数值的问题
-* (2019.12.11) 修复`Series->Data->Size`重置为0后设置无效的问题
-* (2019.12.06) 修复数据过小时`AxisLabel`直接科学计数法显示的问题
-* (2019.12.04) 优化和完善数据更新`UpdateData`接口
-* (2019.12.03) 增加圆环饼图的圆角支持，参数：`serie.arcShaped`
-* (2019.12.03) 增加数据更新动画,参数：`serie.animation.dataChangeEnable`
-* (2019.11.30) 增加`GaugeChart`仪表盘
-* (2019.11.22) 修复`BarChart`清空数据重新赋值后`SerieLabel`显示异常的问题
-* (2019.11.16) 修复`SerieLabel`设置`color`等参数不生效的问题
-
-## v1.0.5
-
-* (2019.11.12) 发布`v1.0.5`版本
-* (2019.11.12) 修复`2018.3`以下版本打开项目报错的问题
-* (2019.11.12) 增加`IconStyle`子组件，优化`SerieData`的图标配置
-* (2019.11.11) 修复`Serie`的图标显示在上层遮挡`Label`的问题
-* (2019.11.11) 修复饼图当数据过小时视觉引导线会穿透的的问题
-* (2019.11.09) 修复饼图添加数据时`Label`异常的问题
-* (2019.11.09) 优化结构，分离为`XCharts`和`XChartsDemo`两部分
-
-## v1.0.4
-
-* (2019.11.05) 发布`v1.0.4`版本
-* (2019.11.05) 增加`Radar`雷达组件文本样式参数配置支持
-* (2019.11.04) 修复`Unity2018.3`以下版本代码不兼容的问题
-* (2019.11.04) 优化`SerieLabel`过多时引起的性能问题
-
-## v1.0.3
-
-* (2019.11.03) 发布`v1.0.3`版本
-* (2019.11.03) 增加`Editor`快捷添加图表：`Hierarchy`试图下右键`XCharts->LineChart`
-* (2019.11.02) 优化非配置参数变量命名和访问权限，简化`API`
-
-## v1.0.2
-
-* (2019.10.31) 发布`v1.0.2`版本
-* (2019.10.31) 修复`prefab`预设制作报错的问题
-* (2019.10.31) 增加访问主题组件API：`BaseChart.theme`
-
-## v1.0.1
-
-* (2019.10.26) 发布`v1.0.1`版本
-* (2019.10.26) 修复版本检查功能在非运行时异常的问题
-* (2019.10.26) 增加科学计数法显示数值的支持（查阅`forceENotation`参数）
-* (2019.10.26) 增加`Axis`类目轴数据为空时的默认显示支持
-* (2019.10.26) 增加`Axis`数值轴的最大最小值可设置为小数的支持，优化极小数图表的表现效果
-
-## v1.0.0
-
-* (2019.10.25) 发布`v1.0.0`版本
-* (2019.10.23) 增加版本检测功能：`Component -> XCharts -> Check For Update`
-* (2019.10.22) 增加`Package Manager`安装的支持
-* (2019.10.20) 增加`Demo`首页`BarChart`的代码动态控制效果
-* (2019.10.18) 增加`Serie`的`barType`参数，可配置`斑马柱状图`
-* (2019.10.18) 增加`Serie`的`barPercentStack`参数，可配置`百分比堆叠柱状图`
-* (2019.10.16) 增加`Demo`首页`LineChart`的代码动态控制效果
-* (2019.10.15) 移除`Pie`组件，相关参数放到`Settings`中配置
-* (2019.10.15) 增加`Demo`首页，展示代码动态控制效果
-* (2019.10.14) 增加`RadarChart`、`ScatterChart`和`HeatmapChart`的起始动画效果
-* (2019.10.14) 增加`SerieData`的`radius`自定义数据项的半径
-* (2019.10.14) 增加`HeatmapChart`热力图
-* (2019.10.14) 增加`VisualMap`视觉映射组件
-* (2019.10.14) 增加`ItemStyle`数据项样式组件
-* (2019.10.14) 增加`Emphasis`高亮样式组件
-* (2019.10.10) 增加`Settings`全局参数配置组件，开放更多参数可配置
-* (2019.10.09) 增加`AreaStyle`的高亮相关参数配置鼠标悬浮时高亮之前区域
-* (2019.10.09) 优化`DataZoom`组件，增加双指缩放
-* (2019.10.05) 增加`SerieLabel`的`LineType`给饼图配置不同类型的视觉引导线
-* (2019.10.02) 增加`ScatterChart`同时对`Scatter`和`Line`的支持，实现折线图和散点图的组合图
-* (2019.10.01) 重构代码，废弃`Series.series`接口，用`Series.list`代替
-* (2019.10.01) 增加`customDrawCallback`自定义绘制回调
-* (2019.10.01) 增加`SmoothDash`平滑虚线的支持
-* (2019.09.30) 增加`Serie`采样类型`sampleType`的相关配置
-* (2019.09.29) 增加`SerieSymbol`关于显示间隔的相关配置
-* (2019.09.29) 重构代码：
-  * `BaseChart`的`sampleDist`删除，`Serie`增加`lineSampleDist`
-  * `BaseChart`的`minShowDataNumber`删除，`Serie`增加`minShow`
-  * `BaseChart`的`maxShowDataNumber`删除，`Serie`增加`maxShow`
-  * `BaseChart`的`maxCacheDataNumber`删除，`Serie`增加`maxCache`
-  * `BaseChart`的`AddSerie()`接口参数调整
-  * `BaseChart`的`UpdateData()`接口参数调整
-  * `Axis`增加`maxCache`
-* (2019.09.28) 增加`LineChart`和`BarChart`同时对`Line`、`Bar`类型`Serie`的支持，实现折线图和柱状图的组合图
-* (2019.09.27) 增加`Axis`的`splitNumber`设置为`0`时表示绘制所有类目数据
-* (2019.09.27) 增加`SampleDist`采样距离的配置，对过密的曲线开启采样，优化绘制效率
-* (2019.09.27) 增加`XCharts问答`、`XChartsAPI接口`、`XCharts配置项手册`等文档
-* (2019.09.26) 增加`AnimationReset()`重置初始化动画接口
-* (2019.09.26) 优化`LineChart`的密集数据的曲线效果
-* (2019.09.25) 优化`SerieData`的自定义图标不与`SerieLabel`关联，可单独控制是否显示
-* (2019.09.24) 增加`SerieData`的自定义图标相关配置支持
-* (2019.09.23) 增加`Formatter`配置`Axis`的`AxisLabel`的格式化输出
-* (2019.09.23) 增加`Tooltip`的`FontSize`、`FontStyle`配置字体大小和样式
-* (2019.09.23) 增加`Formatter`配置`SerieLabel`、`Legend`、`Tooltip`的格式化输出
-* (2019.09.19) 增加`LineArrow`配置带箭头曲线
-* (2019.09.19) 增加`Tooltip`的`FixedWidth`、`FixedHeight`、`MinWidth`、`MinHeight`设置支持
-* (2019.09.18) 增加单条堆叠柱状图
-* (2019.09.18) 增加虚线`Dash`、点线`Dot`、点划线`DashDot`、双点划线`DashDotDot`等类型的折线图支持
-* (2019.09.17) 增加`AnimationEnabel()`启用或取消起始动画接口
-* (2019.09.17) 增加`Axis`的`Interval`强制设置坐标轴分割间隔
-* (2019.09.16) 去掉`Serie`中的旧版本数据兼容，不再支持`xData`和`yData`
-* (2019.09.06) 增加`Animation`在重新初始化数据时自启动功能
-* (2019.09.06) 增加`SerieLabel`的`Border`边框相关配置支持
-* (2019.09.05) 增加`PieChart`的`Animation`初始化动画配置支持
-* (2019.09.03) 增加`BarChart`的`Animation`初始化动画配置支持
-* (2019.09.02) 增加`LineChart`的`Animation`初始化动画配置支持
-* (2019.08.22) 增加`AxisName`的`Offset`偏移配置支持
-* (2019.08.22) 增加`AxisLine`的`Width`配置支持
-* (2019.08.20) 增加`SerieLabel`的背景宽高、文字边距、文字旋转的配置
-* (2019.08.20) 增加`BarChart`的`Label`配置支持
-* (2019.08.15) 增加`LineChart`的`Label`配置
-* (2019.08.15) 重构`BarChart`，移除`Bar`组件，相关参数统一放到`Serie`中配置
-* (2019.08.15) 重构`LineChart`，移除`Line`组件，相关参数统一放到`Serie`中配置
-
-## v0.8.3
-
-* (2019.08.15) 发布`v0.8.3`版本
-* (2019.08.14) 修复`PieChart`的`Label`无法自动更新的问题
-* (2019.08.13) 修复`UpdateData`接口无法更新数据的问题
-* (2019.08.07) 增加`SerieSymbol`的`Color`、`Opacity`配置
-
-## v0.8.2
-
-* (2019.08.07) 发布`v0.8.2`版本
-* (2019.08.07) 修复区域平滑折线图显示异常的问题
-* (2019.08.06) 修复`serie`系列数超过调色盘颜色数时获取的颜色异常的问题
-* (2019.08.06) 修复当`Axis`的`minMaxType`为`Custom`时`max`设置为`100`不生效的问题
-
-## v0.8.1
-
-* (2019.08.04) 发布`v0.8.1`版本
-* (2019.08.04) 修复`Inspector`中修改数据不生效的问题
-
-## v0.8.0
-
-* (2019.08.04) 发布`v0.8.0`版本
-* (2019.08.04) 优化`RadarChart`雷达图，增加多雷达图支持
-* (2019.08.01) 增加代码API注释文档，整理代码
-* (2019.07.29) 增加`Radius`、`Area`两种南丁格尔玫瑰图展示类型
-* (2019.07.29) 增加`SerieLabel`配置饼图标签，支持`Center`、`Inside`、`Outside`等显示位置
-* (2019.07.28) 增加`PieChart`多饼图支持
-* (2019.07.23) 优化`Theme`主题的自定义，切换主题时自定义配置不受影响
-* (2019.07.22) 增加`EffectScatter`类型的散点图
-* (2019.07.21) 增加`ScatterChart`散点图
-* (2019.07.21) 增加`SerieData`支持多维数据配置
-* (2019.07.20) 增加`Symbol`配置`Serie`标志图形的显示
-* (2019.07.19) 增加用代码添加动态正弦曲线的示例`Demo11_AddSinCurve`
-* (2019.07.19) 优化`Legend`的显示和控制
-* (2019.07.18) 优化抗锯齿，曲线更平滑
-* (2019.07.18) 增加`Tooltip`指示器类型，优化显示控制
-* (2019.07.15) 增加`Size`设置图表尺寸
-* (2019.07.14) 增加`二维数据`支持，XY轴都可以设置为数值轴
-* (2019.07.13) 增加`双坐标轴`支持，代码改动较大
-
-## v0.5.0
-
-* (2019.07.10) 发布`v0.5.0`版本
-* (2019.07.09) 增加`AxisLine`配置坐标轴轴线和箭头
-* (2019.07.03) 增加`AxisLabel`配置坐标轴`刻度标签`
-* (2019.07.02) 增加`selected`等相关参数配置`PieChart`的选中效果
-* (2019.06.30) 增加`SplitArea`配置坐标轴`分割区域`
-* (2019.06.29) 增加`AxisName`配置坐标轴`名称`
-* (2019.06.20) 增加`AreaAlpha`控制`RadarChart`的`Area`透明度
-* (2019.06.13) 增加`DataZoom`实现`区域缩放`
-* (2019.06.01) 增加`stepType`实现`LineChart`的`阶梯线图`
-* (2019.05.29) 增加`InSameBar`实现`BarChart`的`非堆叠同柱`
-* (2019.05.29) 增加`crossLabel`控制`Tooltip`的`十字准星指示器`
-* (2019.05.24) 增加`堆叠区域图`
-* (2019.05.16) 增加`AxisMinMaxType`控制坐标轴最大最小刻度
-* (2019.05.15) 完善数据接口
-* (2019.05.14) 增加X轴`AxisType.Value`模式支持
-* (2019.05.13) 增加负数数值轴支持
-* (2019.05.11) 增加自定义`Editor`编辑
-* (2019.03.21) 增加`Tooltip`
-* (2018.11.01) 增加`Default`、`Light`、`Dark`三种默认主题
-
-## v0.1.0
-
-* (2018.09.05) 发布`v0.1.0`版本
--- a/Documentation/README-EN.md.meta
+++ b/Documentation/README-EN.md.meta
@@ -1,7 +0,0 @@
-fileFormatVersion: 2
-guid: 29f30ecf23bb44bc5b0820dc5ee7a23e
-TextScriptImporter:
-  externalObjects: {}
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/SUPPORT.md
+++ b/Documentation/SUPPORT.md
@@ -1,40 +0,0 @@
-## 技术支持
-
-如需技术支持，可订阅VIP服务。扫后面的支付宝二维码后可加VIP群（`867291970`，验证信息请输入支付宝账号）。企业VIP可加官方群私聊群主了解详情。
-
-## 订阅服务
-
-| |免费用户|个人`1`年`VIP`|个人`2`年`VIP` | 个人长期`VIP` |
-| ----- |--|--|--|--|
-| 订阅费用 | --    | `298`¥ | `498`¥ | `888`¥ |
-| 席位时长 | --    | `1`个席位<br>`1`年 | `1`个席位<br>`2`年 | `1`个席位<br>`长期` |
-||
-| <b>`服务方式：`</b>|
-| 官方QQ群交流      | √ | √ | √ | √ |
-| 专属VIP群交流     |   | √ | √ | √ |
-| 即时一对一交流     |   | √ | √ | √ |
-||
-| <b>`服务内容：`</b>|
-| 可商用            | √ | √ | √ | √ |
-| 可二次开发         | √ | √ | √ | √ |
-| 有问必答          |   | √ | √ | √ |
-| 新手指导          |   | √ | √ | √ |
-| 开发指导          |   | √ | √ | √ |
-| 优化指导          |   | √ | √ | √ |
-| 其他技术支持       |   | √ | √ | √ |
-| 问题及时处理       |   | √ | √ | √ |
-| 需求优先考虑       |   | √ | √ | √ |
-| 可另付费定制       |   | √ | √ | √ |
-| 可另付费加急       |   | √ | √ | √ |
-| 付费模块85折       |   |   |   | √ |
-
-## 备注说明
-
-1. __`付费定制`__ 是指用户可根据自己的需求定制不同的图表或新功能，只有`VIP`用户才享有`付费定制`权利。
-2. __`付费加急`__ 是指用户可对自己非常紧急的需求进行付费，将开发优先级提到最高，并指定`Deadline`内交付，只有`VIP`用户才享有`付费加急`权利。
-
-## 捐助支持
-
-如果这个项目对您有帮助，请右上方点 `Star` 予以支持！也欢迎任何金额的赞助，非常感谢！
-
-![alipay-qrcode](res/alipay.png)
--- a/Documentation/SUPPORT.md.meta
+++ b/Documentation/SUPPORT.md.meta
@@ -1,7 +0,0 @@
-fileFormatVersion: 2
-guid: 40051c210ea1244a99317f3264ac567f
-TextScriptImporter:
-  externalObjects: {}
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/XChartsAPI-EN.md
+++ b/Documentation/XChartsAPI-EN.md
--- a/Documentation/XChartsAPI-EN.md.meta
+++ b/Documentation/XChartsAPI-EN.md.meta
@@ -1,7 +0,0 @@
-fileFormatVersion: 2
-guid: 002217c6b4b5348bd86b5a6b881d2622
-TextScriptImporter:
-  externalObjects: {}
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/XChartsAPI-ZH.md
+++ b/Documentation/XChartsAPI-ZH.md
--- a/Documentation/XChartsAPI-ZH.md.meta
+++ b/Documentation/XChartsAPI-ZH.md.meta
@@ -1,7 +0,0 @@
-fileFormatVersion: 2
-guid: 2c38d275e62c6471ea2f4ef69b87b220
-TextScriptImporter:
-  externalObjects: {}
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/XChartsConfiguration-EN.md
+++ b/Documentation/XChartsConfiguration-EN.md
--- a/Documentation/XChartsConfiguration-EN.md.meta
+++ b/Documentation/XChartsConfiguration-EN.md.meta
@@ -1,7 +0,0 @@
-fileFormatVersion: 2
-guid: 1fdd2e77324c84364bf033ffefa41123
-TextScriptImporter:
-  externalObjects: {}
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/XChartsConfiguration-ZH.md
+++ b/Documentation/XChartsConfiguration-ZH.md
--- a/Documentation/XChartsConfiguration-ZH.md.meta
+++ b/Documentation/XChartsConfiguration-ZH.md.meta
@@ -1,7 +0,0 @@
-fileFormatVersion: 2
-guid: 1d5cdb90dc99540768bfb21ea8243d04
-TextScriptImporter:
-  externalObjects: {}
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/XChartsFQA-EN.md
+++ b/Documentation/XChartsFQA-EN.md
@@ -1,161 +0,0 @@
-# XCharts Q&A
-
-[XCharts Homepage](https://github.com/XCharts-Team/XCharts)</br>
-[XCharts API](XChartsAPI-EN.md)</br>
-[XCharts Configuration](XChartsConfiguration-EN.md)
-
-[QA 1: How to adjust the margin between the axis and the background?](#How-to-adjust-the-margin-between-the-axis-and-the=-background)  
-[QA 2: How to play agian the fadeIn animation?](#How-to-play-agian-the-fadeIn-animation)  
-[QA 3: How to customize the color of data item in line chart and pie chart?](#How-to-customize-the-color-of-data-item-in-line-chart-and-pie-chart)  
-[QA 4: How to formatter the text of axis label, such as add a units text?](#How-to-formatter-the-text-of-axis-label-such-as-add-a-units-text)  
-[QA 5: How to stack the bar of bar chart](#How-to-stack-the-bar-of-bar-chart)  
-[QA 6: How to make the bar serie in the same bar but not stack?](#How-to-make-the-bar-serie-in-the-same-bar-but-not-stack)  
-[QA 7: How to adjust the bar width and gap of barchart?](#How-to-adjust-the-bar-width-and-gap-of-barchart)  
-[QA 8: How to adjust the color of bar?](#How-to-adjust-the-color-of-bar)  
-[QA 9: Can I adjust the anchor of chart?](#Can-I-adjust-the-anchor-of-chart)  
-[QA 10: Can display more than 1000 data?](#Can-display-more-than-1000-data)  
-[QA 11: Can line chart drawing be dash, dot and dash-dot?](#Can-line-chart-drawing-be-dash-dot-and-dash-dot)  
-[QA 12: How to limit the value range of the Y-axis?](#How-to-limit-the-value-range-of-the-Y-axis)  
-[QA 13: How to customize the tick value range of value axis?](#How-to-customize-the-tick-value-range-of-value-axis)  
-[QA 14: How to display text at the top of data items?](#How-to-display-text-at-the-top-of-data-items)  
-[QA 15: How do I customize icons for data items?](#How-do-I-customize-icons-for-data-items)  
-[QA 16: How to anti-aliasing and make the chart smoother?](#How-to-anti-aliasing-and-make-the-chart-smoother)  
-[QA 17: Why does mouse over chart Tooltip not show?](#Why-does-mouse-over-chart-Tooltip-not-show)  
-[QA 18: How not to display the bar line of Tooltip?](#How-not-to-display-the-bar-line-of-Tooltip)  
-[QA 19: How do I customize the display of Tooltip?](#How-do-I-customize-the-display-of-Tooltip)  
-[QA 20: How do I get the Y-axis to display multiple decimal places?](#How-do-I-get-the-Y-axis-to-display-multiple-decimal-places)  
-[QA 21: How do I dynamically update data with code?](#How-do-I-dynamically-update-data-with-code)  
-[QA 22: How to display legend? Why are legends sometimes not displayed?](#How-to-display-legend?Why-are-legends-sometimes-not-displayed)  
-[QA 23: How to make chart as prefab?](#How-to-make-chart-as-prefab)  
-[QA 24: How do I draw custom graphic in chart,such as line or dot?](#How-do-I-draw-custom-content-in-chart-such-as-line-or-dot)  
-[QA 25: How to achieve similar data movement effect of ELECTRO cardiogram?](#How-to-achieve-similar-data-movement-effect-of-ELECTRO-cardiogram)  
-[QA 26: How do I use the background component? What are the conditions?](#How-do-I-use-the-background-component-What-are-the-conditions)  
-[QA 27: Mesh can not have more than 65000 vertices?](#Mesh-cannot-have-more-than-65000-vertices)  
-[QA 28: Why are the parameters set in Serie reset after they run?](#Why-are-the-parameters-set-in-Serie-reset-after-they-run)  
-[QA 29: Why are many custom colors lost after upgrading to 1.6.0? How should I upgrade?](#Why_are_many_custom_colors_lost_after_upgrading_to_1_6_0_How_should_I_upgrade)  
-
-## How-to-adjust-the-margin-between-the-axis-and-the=-background
-
-A: `Grid` conponent，which can adjust the left, right, up, down margins of chart.
-
-## How-to-play-agian-the-fadeIn-animation
-
-A: call the `chart.AnimationReset()` API.
-
-## How-to-customize-the-color-of-data-item-in-line chart-and-pie-chart
-
-A: `Theme`->`colorPalette`, or the sub component `LineStyle` and `ItemStyle` of `Serie`.
-
-## How-to-formatter-the-text-of-axis-label-such-as-add-a-units-text
-
-A: Adjust `formatter` and `numericFormatter` parameter of `Legend`, `AxisLabel`, `Tooltop`, `SerieLabel`.
-
-## How-to-stack-the-bar-of-bar-chart
-
-A: Set the `stack` parameter of `Serie`, the series will stack in a bar with the same `stack`.
-
-## How-to-make-the-bar-serie-in-the-same-bar-but-not-stack
-
-A: Set the `barGap` of `Serie` to `-1`，`stack` to null.
-
-## How-to-adjust-the-bar-width-and-gap-of-barchart
-
-A: Adjust the `barWidth` and `barGap` parameter of `Serie`, the last `serie`'s `barWidth` and `barGap` are valid when multiple `serie`.
-
-## How-to-adjust-the-color-of-bar
-
-A: Adjust the `ItemStyle` of `Data` in `inspector`.
-
-## Can-I-adjust-the-anchor-of-chart
-
-A: Yes, you can set any one of 16 anchors but the value use default.
-
-## Can-display-more-than-1000-data
-
-A: Yes. But `UGUI` limits `65000` vertices to a single `Graphic`, so too much data may not be displayed completely. The sampling simplification curve can be turned on by setting the sampling distance `sampleDist`. You can also set some parameters to reduce the number of vertices in the chart to help show more data. Such as reducing the size of the chart, close or reduce the axis of the client drawing, close `Symbol` and `Label` display. A `Normal` line chart occupies fewer vertices than a `Smooth` line chart. The `1.5.0` and above versions can set `large` and `largeThreshold` parameters to enable performance mode.
-
-## Can-line-chart-drawing-be-dash-dot-and-dash-dot
-
-A: Yes. Adjust the `lineType` of `Serie`.
-
-## How-to-limit-the-value-range-of-the-Y-axis
-
-A: Select the `minMaxType` of `Axis` as `Custom`, then set `min` and `max` to the values you want.
-
-## How-to-customize-the-tick-value-range-of-value-axis
-
-A: By default, it is automatically split by the `splitNumber` of `Axis`. Also, you can customize the `interval` to the range you want.
-
-## How-to-display-text-at-the-top-of-data-items
-
-A: Adjust the `Label` of `Serie`.
-
-## How-do-I-customize-icons-for-data-items
-
-A: Set the `Icon` of `Data` in `Serie`.
-
-## How-to-anti-aliasing-and-make-the-chart-smoother
-
-A: Open the `Anti-Aliasing` setting in `Unity`. Selected the UI Canvas `Render Mode` as `Screen Space-Camera`, selected `MSAA`, set `4` times or higher anti-aliasing. The sawtooth can only be reduced and unavoidable. The higher the pixel, the less obvious the sawtooth is.
-
-## Why-does-mouse-over-chart-Tooltip-not-show
-
-A: Verify `Toolip` is opened. Verify that the parent node of chart has turned off mouse events.
-
-## How-not-to-display-the-bar-line-of-Tooltip
-
-A: Set the `type` of `Tooltup` as `None`. Or adjust the parameters of `lineStyle`.
-
-## How-do-I-customize-the-display-of-Tooltip
-
-A: See the `formatter`, `itemFormatter`, `titleFormatter` parameters of `Tooltip`.
-
-## How-do-I-get-the-Y-axis-to-display-multiple-decimal-places
-
-A: Set the `numericFormatter` parameter of `AxisLabel`.
-
-## How-do-I-dynamically-update-data-with-code
-
-A: See example: `Example01_UpdateData.cs`
-
-## How-to-display-legend?Why-are-legends-sometimes-not-displayed
-
-A: First, the `name` in `Serie` must have a value that is not null. Then set `Legend` is `show`, where `data` can be empty by default, indicating that all legends are displayed. If you only want to display part of the `Serie` legend, fill in `data` with the `name` of the legend you want to display. If none of the values in `data` are `name` of the series, the legend will not be displayed.
-
-## How-to-make-chart-as-prefab
-
-A: Before make prefab, please delete all sub gameObject under chart which auto-created by `XCharts`.
-
-## How-do-I-draw-custom-content-in-chart-such-as-line-or-dot
-
-A: Implement `onCustomDraw` of chart, see `Example12_CustomDrawing.cs`.
-
-## How-to-achieve-similar-data-movement-effect-of-ELECTRO-cardiogram
-
-A: See `Example_Dynamic.cs`.
-
-## How-do-I-use-the-background-component-What-are-the-conditions
-
-A: Setting `show` to `true` for the `background` component.
-
-## Mesh-cannot-have-more-than-65000-vertices
-
-A: This is the limit of `UGUI` on the number of vertices for a single `Graphic`. `XCharts` is draw chart on a single `Graphic`, so there is also this limitation. The solution can be referred to: [QA 10: Can display more than 1000 data](#Can-display-more-than-1000-data)  
-
-## Why-are-the-parameters-set-in-Serie-reset-after-they-run
-
-A: Check whether `RemoveData()` and add new `Serie` in the code. If you want to keep the configuration of `Serie`, you can only `ClearData()` which just clear data and then readd the data to the old serie.
-
-## Why_are_many_custom_colors_lost_after_upgrading_to_1_6_0_How_should_I_upgrade
-
-A: In version `1.6.0`, in order to reduce implicit conversion, all drawing related `Color` was changed to `Color32`, so some custom colors were lost. The main components affected are: `ItemStyle`, `LineStyle`, `AreaStyle`, `Vessel`, `VisualMap`, `AxisSplitArea`, `AxisSplitLine`, `GaugeAxis`,`SerieLabel`, etc. Can use the script [UpgradeChartColor.cs](https://github.com/XCharts-Team/XCharts/blob/master/Assets/XCharts/Editor/Tools/UpgradeChartColor.cs) to upgrade.
-The upgrade steps are as follows:
-1. Back up the project.
-2. Download or copy the script [UpgradeChartColor.cs](https://github.com/XCharts-Team/XCharts/blob/master/Assets/XCharts/Editor/Tools/UpgradeChartColor.cs) in the old project `Editor`, Change the `color` field inside to `color.clear` (because some fields may not exist in the old version).
-3. After compilation, the old version of color configuration file is exported through `menu bar -> XCharts-> ExportColorConfig` (the configuration file is saved by default to `color.config` under `Assets`).
-4. Upgrade `XCharts` to the latest version.
-5. The custom color can be restored by importing `color.config` through `menu bar -> XCharts-> ImportColorConfig` (if `color.config` is not under `Assets` of the upgraded project, copy it to this directory).
-
-[XCharts Homepage](https://github.com/XCharts-Team/XCharts)</br>
-[XCharts API](XChartsAPI-EN.md)</br>
-[XCharts Configuration](XChartsConfiguration-EN.md)
--- a/Documentation/XChartsFQA-EN.md.meta
+++ b/Documentation/XChartsFQA-EN.md.meta
@@ -1,7 +0,0 @@
-fileFormatVersion: 2
-guid: 2929481916a9540ed9ecc270be6a3b0e
-TextScriptImporter:
-  externalObjects: {}
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/XChartsFQA-ZH.md
+++ b/Documentation/XChartsFQA-ZH.md
@@ -1,167 +0,0 @@
-# XCharts问答
-
-[XCharts主页](https://github.com/XCharts-Team/XCharts)  
-[XChartsAPI](XChartsAPI-ZH.md)  
-[XCharts配置项手册](XChartsConfiguration-ZH.md)
-
-[QA 1：如何调整坐标轴与背景的边距？](#如何调整坐标轴与背景的边距)  
-[QA 2：如何让初始动画重新播放？](#如何让初始动画重新播放)  
-[QA 3：如何自定义折线图、饼图等数据项的颜色？](#如何自定义折线图_饼图等数据项的颜色)  
-[QA 4：如何格式化文字，如我想给坐标轴标签加上单位？](#如何格式化文字_如我想给坐标轴标签加上单位)  
-[QA 5：如何让柱形图的柱子堆叠显示？](#如何让柱形图的柱子堆叠显示)  
-[QA 6：如何让柱形图的柱子同柱但不重叠？](#如何让柱形图的柱子同柱但不重叠)  
-[QA 7：如何调整柱形图的柱子宽度和间距？](#如何调整柱形图的柱子宽度和间距)  
-[QA 8：如何调整柱形图单个柱子的颜色？](#如何调整柱形图单个柱子的颜色)  
-[QA 9：如何调整图表的对齐方式？](#如何调整图表的对齐方式)  
-[QA 10：可以显示超过1000以上的大数据吗？](#可以显示超过1000以上的大数据吗)  
-[QA 11：折线图可以画虚线、点线、点划线吗？](#折线图可以画虚线_点线_点划线吗)  
-[QA 12：如何限定Y轴（Value轴）的值范围？](#如何限定Y轴的值范围)  
-[QA 13：如何自定义数值轴刻度大小？](#如何自定义数值轴刻度大小)  
-[QA 14：如何在数据项顶上显示文本？](#如何在数据项顶上显示文本)  
-[QA 15：如何给数据项自定义图标？](#如何给数据项自定义图标)  
-[QA 16：锯齿太严重，如何让图表更顺滑？](#锯齿太严重_如何让图表更顺滑)  
-[QA 17：为什么鼠标移上图表 Tooltip 不显示？](#为什么鼠标移上图表Tooltip不显示)  
-[QA 18：如何取消 Tooltip 的竖线？](#如何取消Tooltip的竖线)  
-[QA 19：如何自定义 Tooltip 的显示内容？](#如何自定义Tooltip的显示内容)  
-[QA 20：如何让Y轴（数值轴）显示多位小数？](#如何让Y轴显示多位小数)  
-[QA 21：如何用代码动态更新数据？](#如何用代码动态更新数据)  
-[QA 22：如何显示图例？为什么有时候图例无法显示？](#如何显示图例_为什么有时候图例无法显示)  
-[QA 23：如何做成预设？](#如何做成预设)  
-[QA 24：如何在图表上画点画线等自定义内容？](#如何在图表上画点画线等自定义内容)  
-[QA 25：如何实现心电图类似的数据移动效果？](#如何实现心电图类似的数据移动效果)  
-[QA 26：如何使用背景组件？有什么条件限制？](#如何使用背景组件_有什么条件限制)  
-[QA 27：Mesh can not have more than 65000 vertices?](#Mesh_cannot_have_more_than_65000_vertices)  
-[QA 28：为什么serie里设置的参数运行后又被重置了?](#为什么serie里设置的参数运行后又被重置了)  
-[QA 29：为什么升级到1.6.0版本后很多自定义颜色丢失了?应该如何升级？](#为什么升级到1_6_0版本后很多自定义颜色丢失了_应该如何升级)  
-
-## 如何调整坐标轴与背景的边距
-
-答：`Grid`组件，可调整上下左右边距。
-
-## 如何让初始动画重新播放
-
-答：调用`AnimationReset()`接口。
-
-## 如何自定义折线图_饼图等数据项的颜色
-
-答：通过`Theme`的`colorPalette`调整，或者部分`Serie`下的`LineStyle`和`ItemStyle`。
-
-## 如何格式化文字_如我想给坐标轴标签加上单位
-
-答：通过`formatter`和`numericFormatter`参数，在`Legend`、`Axis`的`AxisLabel`、`Tooltop`、`Serie`的`Label`都提供该参数的配置。
-
-## 如何让柱形图的柱子堆叠显示
-
-答：设置`Serie`下的`stack`，`stack`相同的`serie`会堆叠显示在一个柱子上。
-
-## 如何让柱形图的柱子同柱但不重叠
-
-答：设置`Serie`下的`barGap`为`-1`，`stack`为空。
-
-## 如何调整柱形图的柱子宽度和间距
-
-答：调整`Serie`下的`barWidth`和`barGap`，多个`serie`时最后一个`serie`的`barWidth`和`barGap`有效。
-
-## 如何调整柱形图单个柱子的颜色
-
-答：可通过调整单个`Data`下的`ItemStyle`调整，也可以通过两个`serie`同柱不堆叠来实现，通过设置数据项为`0`来达到类似效果。
-
-## 如何调整图表的对齐方式
-
-答：默认为左下角对齐，暂不支持调整。可以通过包一层parent来辅助控制。（最新版本`1.5.0`及以上已支持任意锚点，可和做UI一样任意调整对其方式）。
-
-## 可以显示超过1000以上的大数据吗
-
-答：可以。但`UGUI`对单个`Graphic`限制`65000`个顶点，所以太多的数据不一定能显示完全。可通过设置采样距离`sampleDist`开启采样简化过密曲线。也可以通过设置一些参数来减少图表的顶点数有助于显示更多数据。如缩小图表的尺寸，关闭或减少坐标轴的客户端绘制，关闭`Serie`的`symbol`和`label`显示等。折线图的普通线图`Normal`比平滑线图`Smooth`占用顶点数更少。`1.5.0`以上版本可以设置`large`和`largeThreshold`参数来开启性能模式。
-
-## 折线图可以画虚线_点线_点划线吗
-
-答：可以。通过`Serie`下的`lineType`选择线条样式。当要显示的数据过多（成千以上）数据间过密时建议使用`Normal`或者`Step`样式。
-
-## 如何限定Y轴的值范围
-
-答：设置`Axis`下的`minMaxType`为`Custom`，自定义`min`和`max`。
-
-## 如何自定义数值轴刻度大小
-
-答：默认时通过`Axis`下的`splitNumer`进行自动划分。也可以设置`interval`自定义刻度大小。
-
-## 如何在数据项顶上显示文本
-
-答：通过设置`Serie`下的`Label`。
-
-## 如何给数据项自定义图标
-
-答：通过设置`Serie`的`data`下的数据项可单独设置`icon`相关参数。
-
-## 锯齿太严重_如何让图表更顺滑
-
-答：开启抗锯齿设置（在`Unity`里设置）。调整UI渲染模式为`Camera`模式，开启`MSAA`，设置`4`倍或更高抗锯齿。
-
-## 为什么鼠标移上图表Tooltip不显示
-
-答：确认`Tooltip`是否开启；确认父节点是否关闭了鼠标事件。
-
-## 如何取消Tooltip的竖线
-
-答：设置`Tooltip`的`type`为`None`。或者调整`lineStyle`的参数。
-
-## 如何自定义Tooltip的显示内容
-
-答：自定义总的内容可以通过`Tooltip`的`formatter`。如果只是想调整所有的`serie`的显示格式可以用`itemFormatter`和`titleFormatter`结合。如果想每个`serie`的显示格式不一样，可以定制`serie`的`itemStyle`里的`tooltipFormatter`。具体的用法请查阅[XCharts配置项手册](XChartsConfiguration-ZH.md)。
-
-## 如何让Y轴显示多位小数
-
-答：设置`Axis`下的`AxisLabel`中的`formatter`为`{value:f1}`或`{value:f2}`。`1.5.0`及以上版本通过`numericFormatter`设置。
-
-## 如何用代码动态更新数据
-
-答：请查阅`Example`下的代码，`Example13_LineSimple.cs`就是一个简单添加数据构建折线图的例子，其他`Demo`也都是通过代码控制不同的组件实现不同的功能，相关API请查看文档：[XChartsAPI接口](XChartsAPI-ZH.md)  。
-
-## 如何显示图例_为什么有时候图例无法显示
-
-答：首先，你的`serie`里的`name`需有值不为空。然后开启`Legend`显示，里面的`data`可以默认为空，表示显示所有的图例。如果你只想显示部分`serie`的图例，在`data`中填入要显示的图例的`name`即可。如果`data`中的值都不是系列的`name`，那图例就不会显示。
-
-## 如何做成预设
-
-答：请删除chart下所有的子组件再拖成预设。
-
-## 如何在图表上画点画线等自定义内容
-
-答：`XCharts`有自定义绘制回调`onCustomDraw`，具体可参考`Example12_CustomDrawing.cs`
-
-## 如何实现心电图类似的数据移动效果
-
-答：参考`Example`目录下的`Example_Dynamic.cs`。主要通过设置`maxCache`参数实现。`axis`和`serie`都设置相同的`maxCache`。`maxCache`可固定数据个数，当数据超过设定时会先删除第一个在添加新数据，实现数据移动效果。
-
-## 如何使用背景组件_有什么条件限制
-
-答：设置`background`组件的`show`为`true`。
-
-## 区域折线图在用半透明颜色时有时候会一条叠加的线
-
-答：这是区域折线图绘制的bug。可以用浅的不透的颜色替代半透明颜色。
-
-## Mesh_cannot_have_more_than_65000_vertices
-
-答：这是`UGUI`对单个`Graphic`的顶点数限制。`XCharts`是将图形绘制在单个`Graphic`上，所以也会有这个限制。解决的办法可以参考：[QA 10：可以显示超过1000以上的大数据吗？](#可以显示超过1000以上的大数据吗)  
-
-## 为什么serie里设置的参数运行后又被重置了
-
-答：检测下代码里是否调用了`RemoveData()`并重新添加`Serie`了。如果想保留`Serie`的配置可以只`ClearData()`，然后重新添加数据。
-
-## 为什么升级到1_6_0版本后很多自定义颜色丢失了_应该如何升级
-
-答：1.6.0版本为了减少隐式转换，将所有的绘制相关的`Color`都改为了`Color32`，所以会导致一些自定义的颜色的丢失。影响到的主要组件有：`ItemStyle`，`LineStyle`，`AreaStyle`，`Vessel`，`VisualMap`，`AxisSplitArea`，`AxisSplitLine`，`GaugeAxis`，`SerieLabel`等。可以用脚本[UpgradeChartColor.cs](https://github.com/XCharts-Team/XCharts/blob/master/Assets/XCharts/Editor/Tools/UpgradeChartColor.cs)进行升级。
-升级步骤如下：
-1. 备份好你的项目。
-2. 先不升级`XCharts`，只下载或拷贝脚本[UpgradeChartColor.cs](https://github.com/XCharts-Team/XCharts/blob/master/Assets/XCharts/Editor/Tools/UpgradeChartColor.cs)放到旧项目的`Editor`下，由于旧版本可能不存在某些新版本才有的图表或者属性配置，可能会编译错误，需要处理按3，4步骤处理一下。
-3. 若是由`itemStyle.toColor2`引起的编译报错，可将导出地方的`itemStyle.toColor2`改为`Color.clear`；导入的地方注释掉即可。
-4. 若是由`LiquidChart`引起的编译报错，将所有涉及`LiquidChart`的地方都注释掉即可。
-5. 编译通过后，通过`菜单栏->XCharts->ExportColorConfig`导出旧版本的颜色配置文件（配置文件默认保存到`Assets`下的`color.config`）。
-6. 升级`XCharts`到最新版本。
-7. 通过`菜单栏->XCharts->ImportColorConfig`将`color.config`导入即可恢复自定义的颜色（如果`color.config`不在升级后的项目的`Assets`下的话需要拷贝到此目录下）。
-
-[XCharts主页](https://github.com/XCharts-Team/XCharts)  
-[XChartsAPI](XChartsAPI-ZH.md)  
-[XCharts配置项手册](XChartsConfiguration-ZH.md)
--- a/Documentation/XChartsFQA-ZH.md.meta
+++ b/Documentation/XChartsFQA-ZH.md.meta
@@ -1,7 +0,0 @@
-fileFormatVersion: 2
-guid: f2d61cadf902a4e20a2690f3c7d2ceea
-TextScriptImporter:
-  externalObjects: {}
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/XChartsTutorial01-EN.md
+++ b/Documentation/XChartsTutorial01-EN.md
@@ -1,231 +0,0 @@
-# 教程：5分钟上手 XCharts 3.0
-
-[XCharts主页](https://github.com/XCharts-Team/XCharts)</br>
-[XCharts问答](XChartsFQA-ZH.md)</br>
-[XChartsAPI接口](XChartsAPI-ZH.md)</br>
-[XCharts配置项手册](XChartsConfiguration-ZH.md)
-
-## 获取和导入 XCharts
-
-1. 直接放入XCharts源码到项目
-
-   下载好XCharts源码后，直接将XCharts目录拷贝到Unity项目工程的Assets目录下。
-
-2. 通过`Assets/Import Package`导入XCharts
-
-   下载好XCharts的.unitypackage文件后，打开Unity，菜单栏 Assets-->Import Package-->选中.unitypackage导入即可开始使用XCharts。
-
-3. 通过`Package Manager`导入XCharts
-
-   对于Unity 2018.3以上版本，可通过 Package Manager来导入XCharts，打开Package Manager后，通过 `Add package form git URL...`，输入XCharts的github URL: https://github.com/XCharts-Team/XCharts.git#master 稍等片刻后即可使用XCharts。
-
-   也可以直接将package加入到`manifest.json`文件：打开`Packages`目录下的`manifest.json`文件，在`dependencies`下加入：
-
-    ``` json
-        "com.monitor1394.xcharts": "https://github.com/XCharts-Team/XCharts.git#master",
-    ```
-
-    如需更新`XCharts`，删除`manifest.json`文件（部分Unity版本可能是packages-lock.json文件）的`lock`下的`com.monitor1394.xcharts`相关内容即会重新下载编译。
-
-## 添加一个简单图表
-
-在`Hierarchy`试图下右键或菜单栏`GameObject`下拉：`XCharts->LineChart`：
-
-![op_addchart](res/op_addchart.png)
-
-即可快速创建一个简单的折线图出来：
-
-![linechart1](res/linechart1.png)
-
-## 添加多个Seire
-
-如何在上图的基础上添加两条折线呢，只需`Add Serie`按钮，选择对应的`Serie`类型即可：
-![op_addserie](res/op_addserie.png)
-![linechart2](res/linechart2.png)
-
-## 添加其他组件
-
-默认图表没有`Legend`，需要`Legend`组件可通过`Add Component`按钮添加：
-![op_addcomponent](res/op_addcomponent.png)
-
-## 添加Serie组件
-
-如果需要给折线图区域填充颜色，可单独给`Serie`添加`Component`：
-![op_addseriecomponent](res/op_addseriecomponent.png)
-![linechart3](res/linechart3.png)
-
-## 添加SerieData组件
-
-如果需要个性化定制每个数据项的配置，可以单独给每个`SerieData`添加`Component`。比如我们给第一个折线图的第二个数据单独显示`Label`：
-![op_addseriedatacomponent](res/op_addseriedatacomponent.png)
-![linechart4](res/linechart4.png)
-
-## 更多组件和配置参数
-
-功能越丰富就越需要更多的组件和参数支持。XCharts有多达几十种的主组件和子组件，每个组件有几个至几十个不等的可配置参数，以支持各种灵活而复杂的功能。
-
-首次接触XCharts者可在 `Inspector` 视图下可以添加和调整各个组件，`Game` 视图会实时反馈调整的效果，以熟悉各种组件实现的效果。各个组件的详细参数说明可查阅[XCharts配置项手册](XChartsConfiguration-ZH.md)。
-
-## 如何快速调整参数
-
-`XCharts`是配置参数驱动。想要什么效果，你只需要去调整对应组件下的配置参数就可以，不需要去改`Hierarchy`试图下的节点，因为那些节点是由`XCharts`内部根据配置参数生成的。你改了也会变还原。
-
-快速定位你想要改的效果对应的组件。这就需要对组件有一定的了解。比如我们想要让X轴的轴线末端显示箭头，如何定位？第一步，X轴定位到`XAxis0`；第二步，轴线定位到`AxisLine`；最后，再去看`AxisLine`组件下有没有这样的参数可以实现这个效果。
-
-`XCharts`提供从全局`Theme`、系列`Serie`、单个数据项`SerieData`全方位的参数配置。优先级从大到小为：`SerieData`->`Serie`->`Theme`。以`ItemStyle`的颜色例，如果`SerieData`的`ItemStyle`配置有颜色值，则优先用这个颜色值。
-
-## 用代码添加折线图
-
-给`gameObject`挂上`LineChart`脚本：
-
-```C#
-var chart = gameObject.GetComponent<LineChart>();
-if (chart == null)
-{
-    chart = gameObject.AddComponent<LineChart>();
-    chart.Init();
-}
-```
-
-调整大小：
-
-```C#
-chart.SetSize(580, 300);//代码动态设置尺寸，或直接操作chart.rectTransform，或直接在Inspector上改
-```
-
-设置标题：
-
-```C#
-var title = chart.GetOrAddChartComponent<Title>();
-title.text = "Simple Line";
-```
-
-设置提示框和图例是否显示：
-
-```C#
-var tooltip = chart.GetOrAddChartComponent<Tooltip>();
-tooltip.show = true;
-
-var legend = chart.GetOrAddChartComponent<Legend>();
-legend.show = false;
-```
-
-设置坐标轴：
-
-```C#
-var xAxis = chart.GetOrAddChartComponent<XAxis>();
-xAxis.splitNumber = 10;
-xAxis.boundaryGap = true;
-xAxis.type =  Axis.AxisType.Category;
-
-var yAxis = chart.GetOrAddChartComponent<YAxis>();
-yAxis.type =  Axis.AxisType.Value;
-```
-
-清空默认数据，添加`Line`类型的`Serie`用于接收数据：
-
-```C#
-chart.RemoveData();
-chart.AddSerie<Line>("line");
-```
-
-添加10个数据：
-
-```C#
-for (int i = 0; i < 10; i++)
-{
-    chart.AddXAxisData("x" + i);
-    chart.AddData(0, Random.Range(10, 20));
-}
-```
-
-这样一个简单的折线图就出来了：
-![linechart-simple](res/linechart-simple.png)
-
-如果一个Chart里面有多个系列时，则Axis的data只需要加一次，不要多个循环加重复了。记住：Axis的数据个数要和Serie的数据个数一致。
-
-完整代码请查阅`Examples`：`Example13_LineSimple.cs`  
-
-你还可以用代码控制更多的参数，`Examples`下还有更多的其他例子，凡是`Inspector`上看到的可配置的参数，都可以通过代码来设置。[XCharts配置项手册](XChartsConfiguration-ZH.md)里面的所有参数都是可以通过代码控制的。
-
-另外，除非定制，建议调用[XChartsAPI接口](https://github.com/XCharts-Team/XCharts/master/Documentation/XChartsAPI-ZH.md)  里面的接口，这些接口内部会做一些关联处理，比如刷新图表等。如果自己调用了内部组件的接口，需要自己处理刷新等其他问题。
-
-## 使用TextMeshPro
-
-XCharts支持TextMeshPro，但默认是不开启的，需要自己手动切换。可通过一下两种方式开启和关闭：
-![textmeshpro1](res/op_textmeshpro.png)
-![textmeshpro2](res/op_textmeshpro2.png)
-开启后需要设置好TextMeshPro要用的全局字体，也可以在主题Theme里单独设置：
-![textmeshpro-font](res/op_textmeshpro3.png)
-建议在项目初就规划好是否使用TextMeshPro，在有很多图表的情况下再切换，可能导致某些图表无法正常初始化，这时可能需要每个图表单独的使用`Remove All Chart Object`来清理让图表重新初始化。
-
-## 用代码改图表参数
-
-`Inspector`上看到的所有参数都可以用代码来修改，关键是要定位好你要改的参数是在组件上、还是serie上、还是在具体的数据项上改。
-
-### 改主组件上的参数
-
-需要先获取组件，再修改里面的参数：
-
-```C#
-var title = chart.GetOrAddChartComponent<Title>();
-title.text = "Simple LineChart";
-title.subText = "normal line";
-
-var xAxis = chart.GetOrAddChartComponent<XAxis>();
-xAxis.splitNumber = 10;
-xAxis.boundaryGap = true;
-xAxis.type = Axis.AxisType.Category;
-```
-
-### 改Serie的参数
-
-新添加Serie：
-
-```C#
-var serie = chart.AddSerie<Pie>();
-serie.center[0] = 0.5f;
-serie.center[1] = 0.5f;
-serie.radius[0] = 80;
-serie.radius[1] = 90;
-serie.animation.dataChangeEnable = true;
-serie.roundCap = true;
-```
-
-已存在的Serie：
-
-```C#
-var serie = chart.GetSerie<Pie>();
-serie.center[0] = 0.5f;
-serie.center[1] = 0.5f;
-serie.radius[0] = 80;
-serie.radius[1] = 90;
-serie.animation.dataChangeEnable = true;
-serie.roundCap = true;
-```
-
-给Serie添加额外组件：
-
-```C#
-serie.AddExtraComponent<AreaStyle>();
-
-var label = serie1.AddExtraComponent<LabelStyle>();
-label.offset = new Vector3(0,20,0);
-```
-
-### 改数据项SerieData上的参数
-
-```C#
-var serieData = chart.AddData(0, 20);
-//var serieData = serie.GetSerieData(0); //从已有数据中获取
-serieData.radius = 10;
-
-var itemStyle = serieData.GetOrAddComponent<ItemStyle>(); //启用SerieData的Component
-itemStyle.color = Color.blue;
-
-```
-
-[XCharts主页](https://github.com/XCharts-Team/XCharts)</br>
-[XCharts问答](XChartsFQA-ZH.md)</br>
-[XChartsAPI接口](XChartsAPI-ZH.md)</br>
-[XCharts配置项手册](XChartsConfiguration-ZH.md)
--- a/Documentation/XChartsTutorial01-EN.md.meta
+++ b/Documentation/XChartsTutorial01-EN.md.meta
@@ -1,7 +0,0 @@
-fileFormatVersion: 2
-guid: a772f2d2a3f994d439db4a07365b9554
-TextScriptImporter:
-  externalObjects: {}
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/XChartsTutorial01-ZH.md
+++ b/Documentation/XChartsTutorial01-ZH.md
@@ -1,231 +0,0 @@
-# 教程：5分钟上手 XCharts 3.0
-
-[XCharts主页](https://github.com/XCharts-Team/XCharts)</br>
-[XCharts问答](XChartsFQA-ZH.md)</br>
-[XChartsAPI接口](XChartsAPI-ZH.md)</br>
-[XCharts配置项手册](XChartsConfiguration-ZH.md)
-
-## 获取和导入 XCharts
-
-1. 直接放入XCharts源码到项目
-
-   下载好XCharts源码后，直接将XCharts目录拷贝到Unity项目工程的Assets目录下。
-
-2. 通过`Assets/Import Package`导入XCharts
-
-   下载好XCharts的.unitypackage文件后，打开Unity，菜单栏 Assets-->Import Package-->选中.unitypackage导入即可开始使用XCharts。
-
-3. 通过`Package Manager`导入XCharts
-
-   对于Unity 2018.3以上版本，可通过 Package Manager来导入XCharts，打开Package Manager后，通过 `Add package form git URL...`，输入XCharts的github URL: https://github.com/XCharts-Team/XCharts.git#master 稍等片刻后即可使用XCharts。
-
-   也可以直接将package加入到`manifest.json`文件：打开`Packages`目录下的`manifest.json`文件，在`dependencies`下加入：
-
-    ``` json
-        "com.monitor1394.xcharts": "https://github.com/XCharts-Team/XCharts.git#master",
-    ```
-
-    如需更新`XCharts`，删除`manifest.json`文件（部分Unity版本可能是packages-lock.json文件）的`lock`下的`com.monitor1394.xcharts`相关内容即会重新下载编译。
-
-## 添加一个简单图表
-
-在`Hierarchy`试图下右键或菜单栏`GameObject`下拉：`XCharts->LineChart`：
-
-![op_addchart](res/op_addchart.png)
-
-即可快速创建一个简单的折线图出来：
-
-![linechart1](res/linechart1.png)
-
-## 添加多个Seire
-
-如何在上图的基础上添加两条折线呢，只需`Add Serie`按钮，选择对应的`Serie`类型即可：
-![op_addserie](res/op_addserie.png)
-![linechart2](res/linechart2.png)
-
-## 添加其他组件
-
-默认图表没有`Legend`，需要`Legend`组件可通过`Add Component`按钮添加：
-![op_addcomponent](res/op_addcomponent.png)
-
-## 添加Serie组件
-
-如果需要给折线图区域填充颜色，可单独给`Serie`添加`Component`：
-![op_addseriecomponent](res/op_addseriecomponent.png)
-![linechart3](res/linechart3.png)
-
-## 添加SerieData组件
-
-如果需要个性化定制每个数据项的配置，可以单独给每个`SerieData`添加`Component`。比如我们给第一个折线图的第二个数据单独显示`Label`：
-![op_addseriedatacomponent](res/op_addseriedatacomponent.png)
-![linechart4](res/linechart4.png)
-
-## 更多组件和配置参数
-
-功能越丰富就越需要更多的组件和参数支持。XCharts有多达几十种的主组件和子组件，每个组件有几个至几十个不等的可配置参数，以支持各种灵活而复杂的功能。
-
-首次接触XCharts者可在 `Inspector` 视图下可以添加和调整各个组件，`Game` 视图会实时反馈调整的效果，以熟悉各种组件实现的效果。各个组件的详细参数说明可查阅[XCharts配置项手册](XChartsConfiguration-ZH.md)。
-
-## 如何快速调整参数
-
-`XCharts`是配置参数驱动。想要什么效果，你只需要去调整对应组件下的配置参数就可以，不需要去改`Hierarchy`试图下的节点，因为那些节点是由`XCharts`内部根据配置参数生成的。你改了也会变还原。
-
-快速定位你想要改的效果对应的组件。这就需要对组件有一定的了解。比如我们想要让X轴的轴线末端显示箭头，如何定位？第一步，X轴定位到`XAxis0`；第二步，轴线定位到`AxisLine`；最后，再去看`AxisLine`组件下有没有这样的参数可以实现这个效果。
-
-`XCharts`提供从全局`Theme`、系列`Serie`、单个数据项`SerieData`全方位的参数配置。优先级从大到小为：`SerieData`->`Serie`->`Theme`。以`ItemStyle`的颜色例，如果`SerieData`的`ItemStyle`配置有颜色值，则优先用这个颜色值。
-
-## 用代码添加折线图
-
-给`gameObject`挂上`LineChart`脚本：
-
-```C#
-var chart = gameObject.GetComponent<LineChart>();
-if (chart == null)
-{
-    chart = gameObject.AddComponent<LineChart>();
-    chart.Init();
-}
-```
-
-调整大小：
-
-```C#
-chart.SetSize(580, 300);//代码动态设置尺寸，或直接操作chart.rectTransform，或直接在Inspector上改
-```
-
-设置标题：
-
-```C#
-var title = chart.GetOrAddChartComponent<Title>();
-title.text = "Simple Line";
-```
-
-设置提示框和图例是否显示：
-
-```C#
-var tooltip = chart.GetOrAddChartComponent<Tooltip>();
-tooltip.show = true;
-
-var legend = chart.GetOrAddChartComponent<Legend>();
-legend.show = false;
-```
-
-设置坐标轴：
-
-```C#
-var xAxis = chart.GetOrAddChartComponent<XAxis>();
-xAxis.splitNumber = 10;
-xAxis.boundaryGap = true;
-xAxis.type =  Axis.AxisType.Category;
-
-var yAxis = chart.GetOrAddChartComponent<YAxis>();
-yAxis.type =  Axis.AxisType.Value;
-```
-
-清空默认数据，添加`Line`类型的`Serie`用于接收数据：
-
-```C#
-chart.RemoveData();
-chart.AddSerie<Line>("line");
-```
-
-添加10个数据：
-
-```C#
-for (int i = 0; i < 10; i++)
-{
-    chart.AddXAxisData("x" + i);
-    chart.AddData(0, Random.Range(10, 20));
-}
-```
-
-这样一个简单的折线图就出来了：
-![linechart-simple](res/linechart-simple.png)
-
-如果一个Chart里面有多个系列时，则Axis的data只需要加一次，不要多个循环加重复了。记住：Axis的数据个数要和Serie的数据个数一致。
-
-完整代码请查阅`Examples`：`Example13_LineSimple.cs`  
-
-你还可以用代码控制更多的参数，`Examples`下还有更多的其他例子，凡是`Inspector`上看到的可配置的参数，都可以通过代码来设置。[XCharts配置项手册](XChartsConfiguration-ZH.md)里面的所有参数都是可以通过代码控制的。
-
-另外，除非定制，建议调用[XChartsAPI接口](https://github.com/XCharts-Team/XCharts/master/Documentation/XChartsAPI-ZH.md)  里面的接口，这些接口内部会做一些关联处理，比如刷新图表等。如果自己调用了内部组件的接口，需要自己处理刷新等其他问题。
-
-## 使用TextMeshPro
-
-XCharts支持TextMeshPro，但默认是不开启的，需要自己手动切换。可通过一下两种方式开启和关闭：
-![textmeshpro1](res/op_textmeshpro.png)
-![textmeshpro2](res/op_textmeshpro2.png)
-开启后需要设置好TextMeshPro要用的全局字体，也可以在主题Theme里单独设置：
-![textmeshpro-font](res/op_textmeshpro3.png)
-建议在项目初就规划好是否使用TextMeshPro，在有很多图表的情况下再切换，可能导致某些图表无法正常初始化，这时可能需要每个图表单独的使用`Remove All Chart Object`来清理让图表重新初始化。
-
-## 用代码改图表参数
-
-`Inspector`上看到的所有参数都可以用代码来修改，关键是要定位好你要改的参数是在组件上、还是serie上、还是在具体的数据项上改。
-
-### 改主组件上的参数
-
-需要先获取组件，再修改里面的参数：
-
-```C#
-var title = chart.GetOrAddChartComponent<Title>();
-title.text = "Simple LineChart";
-title.subText = "normal line";
-
-var xAxis = chart.GetOrAddChartComponent<XAxis>();
-xAxis.splitNumber = 10;
-xAxis.boundaryGap = true;
-xAxis.type = Axis.AxisType.Category;
-```
-
-### 改Serie的参数
-
-新添加Serie：
-
-```C#
-var serie = chart.AddSerie<Pie>();
-serie.center[0] = 0.5f;
-serie.center[1] = 0.5f;
-serie.radius[0] = 80;
-serie.radius[1] = 90;
-serie.animation.dataChangeEnable = true;
-serie.roundCap = true;
-```
-
-已存在的Serie：
-
-```C#
-var serie = chart.GetSerie<Pie>();
-serie.center[0] = 0.5f;
-serie.center[1] = 0.5f;
-serie.radius[0] = 80;
-serie.radius[1] = 90;
-serie.animation.dataChangeEnable = true;
-serie.roundCap = true;
-```
-
-给Serie添加额外组件：
-
-```C#
-serie.AddExtraComponent<AreaStyle>();
-
-var label = serie1.AddExtraComponent<LabelStyle>();
-label.offset = new Vector3(0,20,0);
-```
-
-### 改数据项SerieData上的参数
-
-```C#
-var serieData = chart.AddData(0, 20);
-//var serieData = serie.GetSerieData(0); //从已有数据中获取
-serieData.radius = 10;
-
-var itemStyle = serieData.GetOrAddComponent<ItemStyle>(); //启用SerieData的Component
-itemStyle.color = Color.blue;
-
-```
-
-[XCharts主页](https://github.com/XCharts-Team/XCharts)</br>
-[XCharts问答](XChartsFQA-ZH.md)</br>
-[XChartsAPI接口](XChartsAPI-ZH.md)</br>
-[XCharts配置项手册](XChartsConfiguration-ZH.md)
--- a/Documentation/XChartsTutorial01-ZH.md.meta
+++ b/Documentation/XChartsTutorial01-ZH.md.meta
@@ -1,7 +0,0 @@
-fileFormatVersion: 2
-guid: 2ab7eabdc796a45aea5bc457dc9e27f8
-TextScriptImporter:
-  externalObjects: {}
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/alipay.png
+++ b/Documentation/res/alipay.png
--- a/Documentation/res/alipay.png.meta
+++ b/Documentation/res/alipay.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: 9619faeb62a184c94b83e389fd22f692
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/linechart-simple.png
+++ b/Documentation/res/linechart-simple.png
--- a/Documentation/res/linechart-simple.png.meta
+++ b/Documentation/res/linechart-simple.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: 1e91cbf448b1c44769054375b1686439
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/linechart.png
+++ b/Documentation/res/linechart.png
--- a/Documentation/res/linechart.png.meta
+++ b/Documentation/res/linechart.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: 172962e9e20c74c8a8428f507843b6d3
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/linechart1.png
+++ b/Documentation/res/linechart1.png
--- a/Documentation/res/linechart1.png.meta
+++ b/Documentation/res/linechart1.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: e610f9feea0064345909b632bba12e2e
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/linechart2.png
+++ b/Documentation/res/linechart2.png
--- a/Documentation/res/linechart2.png.meta
+++ b/Documentation/res/linechart2.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: ba7e7b5180b354b26baf5314d5da59f6
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/linechart3.png
+++ b/Documentation/res/linechart3.png
--- a/Documentation/res/linechart3.png.meta
+++ b/Documentation/res/linechart3.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: 42bd080b0812b4bdcb8685adad22cd1e
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/linechart4.png
+++ b/Documentation/res/linechart4.png
--- a/Documentation/res/linechart4.png.meta
+++ b/Documentation/res/linechart4.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: 52450d00759b44e678862b5ca8895072
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/op_addchart.png
+++ b/Documentation/res/op_addchart.png
--- a/Documentation/res/op_addchart.png.meta
+++ b/Documentation/res/op_addchart.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: 33ca1e807bf9b44daa62fa68040f7a17
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/op_addcomponent.png
+++ b/Documentation/res/op_addcomponent.png
--- a/Documentation/res/op_addcomponent.png.meta
+++ b/Documentation/res/op_addcomponent.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: c7e8baa3a53ba41e9bb63d02176b87ff
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/op_addserie.png
+++ b/Documentation/res/op_addserie.png
--- a/Documentation/res/op_addserie.png.meta
+++ b/Documentation/res/op_addserie.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: 4fa12bb2901d144b88abb5f304979291
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/op_addseriecomponent.png
+++ b/Documentation/res/op_addseriecomponent.png
--- a/Documentation/res/op_addseriecomponent.png.meta
+++ b/Documentation/res/op_addseriecomponent.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: b1eb790b2091e4df380350030c6d8d8d
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/op_addseriedatacomponent.png
+++ b/Documentation/res/op_addseriedatacomponent.png
--- a/Documentation/res/op_addseriedatacomponent.png.meta
+++ b/Documentation/res/op_addseriedatacomponent.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: 1ca6fe245906a453284b526f09c44eff
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/op_textmeshpro.png
+++ b/Documentation/res/op_textmeshpro.png
--- a/Documentation/res/op_textmeshpro.png.meta
+++ b/Documentation/res/op_textmeshpro.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: 9031f7bed8c7f4350affc32cc7016b5e
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/op_textmeshpro2.png
+++ b/Documentation/res/op_textmeshpro2.png
--- a/Documentation/res/op_textmeshpro2.png.meta
+++ b/Documentation/res/op_textmeshpro2.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: 5b533c6dca4e643c0a3cf0152ea053c3
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation/res/op_textmeshpro3.png
+++ b/Documentation/res/op_textmeshpro3.png
--- a/Documentation/res/op_textmeshpro3.png.meta
+++ b/Documentation/res/op_textmeshpro3.png.meta
@@ -1,76 +0,0 @@
-fileFormatVersion: 2
-guid: 1777b9bc4f1df446eaf01931cb0b07ed
-TextureImporter:
-  fileIDToRecycleName: {}
-  externalObjects: {}
-  serializedVersion: 4
-  mipmaps:
-    mipMapMode: 0
-    enableMipMap: 1
-    sRGBTexture: 1
-    linearTexture: 0
-    fadeOut: 0
-    borderMipMap: 0
-    mipMapsPreserveCoverage: 0
-    alphaTestReferenceValue: 0.5
-    mipMapFadeDistanceStart: 1
-    mipMapFadeDistanceEnd: 3
-  bumpmap:
-    convertToNormalMap: 0
-    externalNormalMap: 0
-    heightScale: 0.25
-    normalMapFilter: 0
-  isReadable: 0
-  grayScaleToAlpha: 0
-  generateCubemap: 6
-  cubemapConvolution: 0
-  seamlessCubemap: 0
-  textureFormat: 1
-  maxTextureSize: 2048
-  textureSettings:
-    serializedVersion: 2
-    filterMode: -1
-    aniso: -1
-    mipBias: -1
-    wrapU: -1
-    wrapV: -1
-    wrapW: -1
-  nPOTScale: 1
-  lightmap: 0
-  compressionQuality: 50
-  spriteMode: 0
-  spriteExtrude: 1
-  spriteMeshType: 1
-  alignment: 0
-  spritePivot: {x: 0.5, y: 0.5}
-  spritePixelsToUnits: 100
-  spriteBorder: {x: 0, y: 0, z: 0, w: 0}
-  spriteGenerateFallbackPhysicsShape: 1
-  alphaUsage: 1
-  alphaIsTransparency: 0
-  spriteTessellationDetail: -1
-  textureType: 0
-  textureShape: 1
-  maxTextureSizeSet: 0
-  compressionQualitySet: 0
-  textureFormatSet: 0
-  platformSettings:
-  - buildTarget: DefaultTexturePlatform
-    maxTextureSize: 2048
-    resizeAlgorithm: 0
-    textureFormat: -1
-    textureCompression: 1
-    compressionQuality: 50
-    crunchedCompression: 0
-    allowsAlphaSplitting: 0
-    overridden: 0
-    androidETC2FallbackOverride: 0
-  spriteSheet:
-    serializedVersion: 2
-    sprites: []
-    outline: []
-    physicsShape: []
-  spritePackingTag: 
-  userData: 
-  assetBundleName: 
-  assetBundleVariant: 
--- a/Documentation~/en/api.md
+++ b/Documentation~/en/api.md
--- a/Documentation~/en/changelog.md
+++ b/Documentation~/en/changelog.md
--- a/Documentation~/en/configuration.md
+++ b/Documentation~/en/configuration.md
--- a/Documentation~/en/faq.md
+++ b/Documentation~/en/faq.md
@@ -0,0 +1,152 @@
+---
+sidebar_position: 41
+slug: /faq
+---
+
+# FAQ
+
+## FAQ 1: How to adjust the margin between the axis and the background?
+
+`Grid` conponent，which can adjust the left, right, up, down margins of chart.
+
+## FAQ 2: How to play agian the fadeIn animation?
+
+call the `chart.AnimationReset()` API.
+
+## FAQ 3: How to customize the color of data item in line chart and pie chart?
+
+`Theme`->`colorPalette`, or the sub component `LineStyle` and `ItemStyle` of `Serie`.
+
+## FAQ 4: How to formatter the text of axis label, such as add a units text?
+
+Adjust `formatter` and `numericFormatter` parameter of `Legend`, `AxisLabel`, `Tooltop`, `SerieLabel`.
+
+## FAQ 5: How to stack the bar of bar chart?
+
+Set the `stack` parameter of `Serie`, the series will stack in a bar with the same `stack`.
+
+## FAQ 6: How to make the bar serie in the same bar but not stack?
+
+Set the `barGap` of `Serie` to `-1`，`stack` to null.
+
+## FAQ 7: How to adjust the bar width and gap of barchart?
+
+Adjust the `barWidth` and `barGap` parameter of `Serie`, the last `serie`'s `barWidth` and `barGap` are valid when multiple `serie`.
+
+## FAQ 8: How to adjust the color of bar?
+
+Adjust the `ItemStyle` of `Data` in `inspector`.
+
+## FAQ 9: Can I adjust the anchor of chart?
+
+Yes, you can set any one of 16 anchors but the value use default.
+
+## FAQ 10: Can display more than 1000 data?
+
+Yes. But `UGUI` limits `65000` vertices to a single `Graphic`, so too much data may not be displayed completely. The sampling simplification curve can be turned on by setting the sampling distance `sampleDist`. You can also set some parameters to reduce the number of vertices in the chart to help show more data. Such as reducing the size of the chart, close or reduce the axis of the client drawing, close `Symbol` and `Label` display. A `Normal` line chart occupies fewer vertices than a `Smooth` line chart. The `1.5.0` and above versions can set `large` and `largeThreshold` parameters to enable performance mode.
+
+## FAQ 11: Can line chart drawing be dash, dot and dash-dot?
+
+Yes. Adjust the `lineType` of `Serie`.
+
+## FAQ 12: How to limit the value range of the Y-axis?
+
+Select the `minMaxType` of `Axis` as `Custom`, then set `min` and `max` to the values you want.
+
+## FAQ 13: How to customize the tick value range of value axis?
+
+By default, it is automatically split by the `splitNumber` of `Axis`. Also, you can customize the `interval` to the range you want.
+
+## FAQ 14: How to display text at the top of data items?
+
+Adjust the `Label` of `Serie`.
+
+## FAQ 15: How do I customize icons for data items?
+
+Set the `Icon` of `Data` in `Serie`.
+
+## FAQ 16: How to anti-aliasing and make the chart smoother?
+
+Open the `Anti-Aliasing` setting in `Unity`. Selected the UI Canvas `Render Mode` as `Screen Space-Camera`, selected `MSAA`, set `4` times or higher anti-aliasing. The sawtooth can only be reduced and unavoidable. The higher the pixel, the less obvious the sawtooth is.
+
+## FAQ 17: Why does mouse over chart Tooltip not show?
+
+Verify `Toolip` is opened. Verify that the parent node of chart has turned off mouse events.
+
+## FAQ 18: How not to display the bar line of Tooltip?
+
+Set the `type` of `Tooltup` as `None`. Or adjust the parameters of `lineStyle`.
+
+## FAQ 19: How do I customize the display of Tooltip?
+
+See the `formatter`, `itemFormatter`, `titleFormatter` parameters of `Tooltip`.
+
+## FAQ 20: How do I get the Y-axis to display multiple decimal places?
+
+Set the `numericFormatter` parameter of `AxisLabel`.
+
+## FAQ 21: How do I dynamically update data with code?
+
+See example: `Example01_UpdateData.cs`
+
+## FAQ 22: How to display legend? Why are legends sometimes not displayed?
+
+First, the `name` in `Serie` must have a value that is not null. Then set `Legend` is `show`, where `data` can be empty by default, indicating that all legends are displayed. If you only want to display part of the `Serie` legend, fill in `data` with the `name` of the legend you want to display. If none of the values in `data` are `name` of the series, the legend will not be displayed.
+
+## FAQ 23: How to make chart as prefab?
+
+Before make prefab, please delete all sub gameObject under chart which auto-created by `XCharts`.
+
+## FAQ 24: How do I draw custom graphic in chart,such as line or dot?
+
+Implement `onCustomDraw` of chart, see `Example12_CustomDrawing.cs`.
+
+## FAQ 25: How to achieve similar data movement effect of ELECTRO cardiogram?
+
+See `Example_Dynamic.cs`.
+
+## FAQ 26: How do I use the background component? What are the conditions?
+
+Setting `show` to `true` for the `background` component.
+
+## FAQ 27: Mesh can not have more than 65000 vertices?
+
+This is the limit of `UGUI` on the number of vertices for a single `Graphic`. `XCharts` is draw chart on a single `Graphic`, so there is also this limitation. The solution can be referred to: [FAQ 10: Can display more than 1000 data?](#FAQ-10-can-display-more-than-1000-data)  
+
+## FAQ 28: Why are the parameters set in Serie reset after they run?
+
+Check whether `RemoveData()` and add new `Serie` in the code. If you want to keep the configuration of `Serie`, you can only `ClearData()` which just clear data and then readd the data to the old serie.
+
+## FAQ 29: How to change the color of serie symbol?
+
+The color of 'Symbol' is the color of 'ItemStyle' used.
+
+## FAQ 30: How to deal with TMP errors when importing or updating XCharts?
+
+XCharts does not enable TMP by default, so there are no references to TMP on asmdef. This issue may occur when updating XCharts after TMP is enabled locally. It can be solved in the following two ways:
+
+1. Find `XCharts.Runtime.asmdef` and `XCharts.Editor.asmdef` and manually add references to `TextMeshPro`
+2. Remove the `dUI_TextMeshPro` macro for Scripting Define Symbols in PlayerSetting
+
+Version ` 3.8.0 ` after adding Daemon [XCharts - Daemon](https://github.com/XCharts-Team/XCharts-Daemon), will be XCharts - Daemon import project, When updating XCharts, the daemon automatically refreshes the asmdef based on the locally enabled TMP to ensure proper compilation.
+
+## FAQ 31: Support empty data? How to achieve the effect of line chart disconnection?
+
+`data` of `Serie` is of type `double`, so it cannot represent empty data. Empty data can be achieved by turning on Serie's ignore and specifying ignoreValue. You can also set the ignore parameter for each SerieData. The ignoreLineBreak parameter can be set to disconnect or connect after ignoring data.
+
+## FAQ 32: 2.x What are the common problems when upgrading version 3.x?
+
+1. `XCharts.Runtime.XChartsMgr` is missing the class attribute `ExtensionOfNativeClass`!
+3.x version does not need to mount XChartsMgr, directly delete the `_xcharts_` node on the scene.
+
+## FAQ 33: How to display a line chart without white space on both sides and start from the 0 coordinate?
+
+Set the `boundaryGap` parameter of the X-axis.
+
+## FAQ 34: How to set some Series not to display Tooltips?
+
+Setting the `itemFormatter` of `itemStyle` in `serie` to `'-'` can ignore `tooltip`.
+
+## FAQ 35: Sometimes an overlapping line appears in the area line chart when using semi-transparent colors
+
+This is a bug in the drawing of the area line chart. You can use light opaque colors instead of semi-transparent colors.
--- a/Documentation~/en/img/readme_buildinchart.png
+++ b/Documentation~/en/img/readme_buildinchart.png
--- a/Documentation~/en/img/readme_extendchart.png
+++ b/Documentation~/en/img/readme_extendchart.png
--- a/Documentation~/en/img/readme_xcharts3.png
+++ b/Documentation~/en/img/readme_xcharts3.png
--- a/Documentation~/en/img/support_alipay.png
+++ b/Documentation~/en/img/support_alipay.png
--- a/Documentation~/en/img/support_wechat.png
+++ b/Documentation~/en/img/support_wechat.png
--- a/Documentation~/en/img/tutorial01_addcomponent.png
+++ b/Documentation~/en/img/tutorial01_addcomponent.png
--- a/Documentation~/en/img/tutorial01_addserie.png
+++ b/Documentation~/en/img/tutorial01_addserie.png
--- a/Documentation~/en/img/tutorial01_addseriecomponent.png
+++ b/Documentation~/en/img/tutorial01_addseriecomponent.png
--- a/Documentation~/en/img/tutorial01_addseriedatacomponent.png
+++ b/Documentation~/en/img/tutorial01_addseriedatacomponent.png
--- a/Documentation~/en/img/tutorial01_axisdata.png
+++ b/Documentation~/en/img/tutorial01_axisdata.png
--- a/Documentation~/en/img/tutorial01_linechart1.png
+++ b/Documentation~/en/img/tutorial01_linechart1.png
--- a/Documentation~/en/img/tutorial01_linechart2.png
+++ b/Documentation~/en/img/tutorial01_linechart2.png
--- a/Documentation~/en/img/tutorial01_linechart3.png
+++ b/Documentation~/en/img/tutorial01_linechart3.png
--- a/Documentation~/en/img/tutorial01_linechart4.png
+++ b/Documentation~/en/img/tutorial01_linechart4.png
--- a/Documentation~/en/img/tutorial01_linechart_simple.png
+++ b/Documentation~/en/img/tutorial01_linechart_simple.png
--- a/Documentation~/en/img/tutorial01_seriedata.png
+++ b/Documentation~/en/img/tutorial01_seriedata.png
--- a/Documentation~/en/img/tutorial01_textmeshpro.png
+++ b/Documentation~/en/img/tutorial01_textmeshpro.png
--- a/Documentation~/en/img/tutorial01_textmeshpro_font.png
+++ b/Documentation~/en/img/tutorial01_textmeshpro_font.png
--- a/Documentation~/en/img/xcharts.png
+++ b/Documentation~/en/img/xcharts.png
--- a/Documentation~/en/support.md
+++ b/Documentation~/en/support.md
@@ -0,0 +1,9 @@
+---
+title: Support
+sidebar_position: 51
+slug: /support
+---
+
+# Support
+
+For technical support and to purchase additional charts, you can subscribe to the `VIP` service. For details, please send an email to `monitor1394@gmail.com` for consultation.
--- a/Documentation~/en/tutorial01.md
+++ b/Documentation~/en/tutorial01.md
@@ -0,0 +1,381 @@
+---
+title: Getting Started
+sidebar_position: 11
+slug: /tutorial01
+---
+
+# Getting Started with XCharts in 5 Minutes
+
+:::warning
+
+Note: This tutorial is only applicable to the XCharts 3.x version. For the 2.x version, please refer to [Tutorial: Mastering XCharts 2.0](https://github.com/XCharts-Team/XCharts/blob/2.0/Doc/tutorial--get-start-with-xcharts-in-5-minute-EN.md)
+
+:::
+
+## Prerequisites for XCharts
+
+XCharts is a Unity chart plugin, currently only available for use on the Unity platform.
+
+Before using XCharts, you need to:
+
+- Have a basic understanding of how to use Unity.
+- Understand the basic usage of UGUI for making UI.
+- Know how to use Unity's MonoBehavior scripts, how to attach scripts, and how to manipulate scripts with code.
+
+If you are new to Unity, it is recommended to learn some basic Unity tutorials before using XCharts.
+
+## Obtaining and Importing XCharts
+
+XCharts is primarily maintained and released through Github. You can download the source code and Package from the [Github Homepage](https://github.com/XCharts-Team).
+
+XCharts can be imported into your project in any of the following ways:
+
+### Copying the XCharts Source Code Directly into the Project
+
+After downloading the XCharts source code, simply copy the XCharts directory into the Assets directory of your Unity project. Once compiled, it is ready to use.
+
+### Importing XCharts through Import Package
+
+After downloading the .unitypackage file of XCharts, open Unity, go to the menu bar Assets-->Import Package-->select the downloaded .unitypackage to import. After the import is complete and compiled, you can start using XCharts.
+
+### Importing XCharts through Package Manager
+
+For Unity versions above 2018.3, you can import XCharts through the Package Manager. Open the Package Manager, then use `Add package from git URL...`, enter the GitHub URL of XCharts: `https://github.com/XCharts-Team/XCharts.git`. After compiling, you can use XCharts.
+
+For some Unity versions, you can also directly add the package to the `manifest.json` file: Open the `manifest.json` file under the `Packages` directory, and add the following under `dependencies`:
+
+>"com.monitor1394.xcharts": "https://github.com/XCharts-Team/XCharts.git",
+
+If you need to update `XCharts`, delete the relevant content of `com.monitor1394.xcharts` under the `lock` of the `manifest.json` file (some Unity versions may be the packages-lock.json file), and it will re-download and compile.
+
+### Recommended Import of XCharts Daemon
+
+The daemon [XCharts-Daemon](https://github.com/XCharts-Team/XCharts-Daemon) ensures that the compilation is normal when updating. It is very useful when TextMeshPro or NewInputSystem is turned on locally. After importing XCharts-Daemon into the project, the daemon will automatically refresh XCharts' asmdef according to the local situation of TMP when updating XCharts, ensuring that the compilation is normal without manual intervention, which is convenient for automated processes such as CI/CD.
+
+The import method of XCharts-Daemon can refer to the previous import method of XCharts. It can be imported into the project through source code or Package. The GitHub URL of XCharts-Daemon: https://github.com/XCharts-Team/XCharts-Daemon.git
+
+## Basic Usage of XCharts
+
+After importing XCharts and compiling, the XCharts menu will appear in the Unity editor's menu bar, and you can start using XCharts.
+
+:::tip
+
+Note: The XCharts menu in the Unity menu bar indicates that XCharts is available.
+
+:::
+
+### Adding a Simple Chart
+
+In the `Hierarchy` view, right-click `UI->XCharts->LineChart` or select `LineChart` from the menu bar `XCharts` to quickly create a default line chart:
+
+![linechart1](img/tutorial01_linechart1.png)
+
+If you need to create a chart under a certain node, you can select the node and right-click `UI->XCharts->LineChart` to create a chart under the node.
+
+### Modifying Chart Data
+
+For the newly created chart, its data can be modified on the Inspector panel.
+
+For X-axis data, you can add, delete, and modify by expanding: `XAxis->Data`:
+
+![op_axisdata](img/tutorial01_axisdata.png)
+
+For Serie data, you can add, delete, and modify by expanding: `Serie->Data`:
+
+![op_seriedata](img/tutorial01_seriedata.png)
+
+Serie supports multi-dimensional data, and generally, a line chart only uses two-dimensional data: the first dimension represents the ID of the X-axis category data, and the second dimension represents the corresponding value.
+
+### Adding Multiple Series
+
+In the `Inspector` view, find the `LineChart` panel, and click the `Add Serie` button to add a second `Line` line:
+
+![op_addserie](img/tutorial01_addserie.png)
+![linechart2](img/tutorial01_linechart2.png)
+
+:::tip
+
+Series are added through the `Add Serie` button. Different types of Series can be added. [What kinds of Series does XCharts have?](https://xcharts-team.github.io/en/docs/configuration#serie-系列)
+
+:::
+
+### Adding Other Main Components
+
+By default, the chart does not have a `Legend`. If you need a `Legend` component, you can add it through the `Add Component` button:
+
+![op_addcomponent](img/tutorial01_addcomponent.png)
+
+:::tip
+
+Main components are added through the `Add Component` button. [What main components does XCharts have?](https://xcharts-team.github.io/en/docs/configuration/#maincomponent-主组件) 
+
+:::
+
+### Adding Serie Components
+
+Serie only comes with a few common components, and other components need to be added when used. For example, if you need to fill the area color for the line chart, you can add an `AreaStyle` component to `Serie` separately:
+
+![op_addseriecomponent](img/tutorial01_addseriecomponent.png)
+![linechart3](img/tutorial01_linechart3.png)
+
+:::tip
+
+Serie components are added through the button on the right side of Serie. [What components can be added to Serie in XCharts?](https://xcharts-team.github.io/en/docs/configuration/#iseriecomponent-可添加到serie的组件)
+
+:::
+
+### Adding SerieData Components
+
+If you need to customize the configuration of each data item individually, you can add components to each `SerieData` separately. For example, we can display `Label` for the second data of the line chart individually:
+
+![op_addseriedatacomponent](img/tutorial01_addseriedatacomponent.png)
+![linechart4](img/tutorial01_linechart4.png)
+
+:::tip
+
+SerieData components are added through the button on the right side of SerieData after expanding. [What components can be added to SerieData in XCharts?](https://xcharts-team.github.io/en/docs/configuration/#iseriedatacomponent-可添加到seriedata的组件) 
+
+:::
+
+### More Components and Configuration Parameters
+
+XCharts has been continuously iterated and optimized, and now has dozens of main components and sub-components, each with several to dozens of configurable parameters to support a variety of functions.
+
+When using XCharts for the first time, it is recommended to personally test the actual effects of each chart, each component. The `Inspector` view can directly add various charts, components, and adjust various configuration parameters, and the `Game` view will provide real-time feedback on the adjustments. A detailed description of each component's parameters can be found in the [XCharts Configuration Manual](configuration.md).
+
+### How to Quickly Adjust Parameters
+
+XCharts is driven by data and parameters. To achieve the desired effect, simply adjust the configuration parameters under the corresponding component. Do not modify the nodes under the `Hierarchy` view, as those nodes are generated by XCharts internally based on configuration and data, and will be restored upon refresh.
+
+To quickly locate the component corresponding to the effect you want to change, you need to have a certain understanding of the components. For example, we want to display an arrow at the end of the X-axis line. How to locate it? The first step, the X-axis is located at `XAxis0`; the second step, the axis line is located at `AxisLine`; finally, check if there is such a parameter under the `AxisLine` component to achieve this effect. If you are not sure about the parameters, you can refer to the [XCharts Configuration Manual](configuration.md).
+
+`XCharts` provides comprehensive parameter configuration from the global `Theme`, series `Serie`, and individual data items `SerieData`. The priority order from high to low is: `SerieData`->`Serie`->`Theme`. Take the color of `ItemStyle` as
+ an example:
+
+1. If the `ItemStyle` of `SerieData` has a color value other than `0000`, this color value is used first.
+2. If the `ItemStyle` of `Serie` has a color value other than `0000`, this color value is used.
+3. Otherwise, the color value is taken from the `Color Palette` of the theme `Theme`.
+
+:::tip
+
+The color value is usually `0000` when using the default color of the theme; other parameters are `0` or null when using the default configuration of the theme; pay attention to transparency when setting colors.
+
+:::
+
+### Adding a Line Chart with Code
+
+Attach the `LineChart` script to `gameObject`:
+
+```csharp
+var chart = gameObject.GetComponent<LineChart>();
+if (chart == null)
+{
+    chart = gameObject.AddComponent<LineChart>();
+    chart.Init();
+}
+```
+
+Adjust the size:
+
+```csharp
+chart.SetSize(580, 300);//Dynamically set the size with code, or directly operate chart.rectTransform, or directly change it in the Inspector
+```
+
+Set the title:
+
+```csharp
+var title = chart.EnsureChartComponent<Title>();
+title.text = "Simple Line";
+```
+
+Set whether to display the tooltip and legend:
+
+```csharp
+var tooltip = chart.EnsureChartComponent<Tooltip>();
+tooltip.show = true;
+
+var legend = chart.EnsureChartComponent<Legend>();
+legend.show = false;
+```
+
+Set the coordinate axis:
+
+```csharp
+var xAxis = chart.EnsureChartComponent<XAxis>();
+xAxis.splitNumber = 10;
+xAxis.boundaryGap = true;
+xAxis.type =  Axis.AxisType.Category;
+
+var yAxis = chart.EnsureChartComponent<YAxis>();
+yAxis.type =  Axis.AxisType.Value;
+```
+
+Clear all default data (including Series), add a `Line` type `Serie` to receive data:
+
+```csharp
+chart.RemoveData();
+chart.AddSerie<Line>("line");
+```
+
+If the Serie is fixed, it is recommended to only clear the data, not to remove the Serie:
+
+```csharp
+chart.ClearData();
+```
+
+This way, you can set the configuration parameters of Serie in the UI in advance.
+
+Add 10 data points:
+
+```csharp
+for (int i = 0; i < 10; i++)
+{
+    chart.AddXAxisData("x" + i);
+    chart.AddData(0, Random.Range(10, 20));
+}
+```
+
+Now, a simple line chart is ready:
+
+![tutorial01_linechart_simple](img/tutorial01_linechart_simple.png)
+
+If there are multiple series in a Chart, the data of Axis only needs to be added once, and should not be repeated in multiple loops.
+
+:::tip
+
+Remember: The number of Axis data should be consistent with the number of Serie data.
+
+:::
+
+For the complete code, please refer to `Examples`: `Example13_LineSimple.cs`  
+
+You can also control more parameters with code. There are more examples in `Examples`. All parameters that can be configured in the `Inspector` can be set with code. All parameters in the [XCharts Configuration Manual](configuration.md) can be controlled by code.
+
+### Setting the Default Font
+
+The default font used by XCharts is Unity's default font `Arial`, which may not display Chinese characters on the WebGL platform. When using XCharts in your project, it is recommended to set the font first:
+
+- Find the `XCharts/Resources/XCSetting.asset` resource and modify the `Font` inside and save.
+- Find the `XCharts/Resources/XCTheme-Default.asset` and `XCharts/Resources/XCTheme-Dark.asset` font configurations, and click the `Sync Font from Setting` and `Sync Font to Sub Theme` buttons to synchronize the font to the theme configuration files.
+
+After the font is set, newly created charts will use the newly set font. For old charts, you can click the `Rebuild Chart Object` button to refresh.
+
+:::tip
+
+It is recommended to set the font before using XCharts; when updating XCharts, pay attention to the potential restoration of the set font.
+
+:::
+
+### Using TextMeshPro
+
+XCharts supports TextMeshPro, but it is not enabled by default and needs to be switched on manually. It can be turned on and off in the following ways:
+
+![textmeshpro1](img/tutorial01_textmeshpro.png)
+
+After turning it on, you need to set the global font to be used by TextMeshPro, and it can also be set individually in the Theme:
+
+![textmeshpro-font](img/tutorial01_textmeshpro_font.png)
+
+It is recommended to plan whether to use TextMeshPro at the beginning of the project and set the font accordingly. When switching to TMP in a project with many charts, some charts may not refresh automatically, and you can manually click the `Rebuild Chart Object` button to rebuild the chart, which will initialize normally.
+
+If you have enabled TMP in your project, you may encounter compilation failures due to lost TMP references when updating XCharts. This can be solved in the following two ways:
+
+1. Find `XCharts.Runtime.asmdef` and `XCharts.Editor.asmdef`, and manually add references to `TextMeshPro`.
+2. Remove the `dUI_TextMeshPro` macro from the `Scripting Define Symbols` in `PlayerSetting`.
+
+After the `3.8.0` version, the [XCharts-Daemon](https://github.com/XCharts-Team/XCharts-Daemon) daemon was added. After importing XCharts-Daemon into the project, the daemon will automatically refresh the asmdef based on the local situation of the enabled TMP when updating XCharts, ensuring normal compilation.
+
+## XCharts Code Control
+
+All parameters seen in the `Inspector` can be modified with code. The key is to locate the parameter you want to change, whether it is on the component, the Serie, or the specific data item SerieData.
+
+In addition, unless customized, it is recommended to call the `public` interfaces provided under `Chart`, especially for data-related and list operations. These interfaces will do some associated processing internally, such as refreshing the chart. Common interfaces include:
+
+1. `chart.ClearData()`: Clear chart data (does not remove Series)
+2. `chart.RemoveData()`: Clear chart data (will remove all Series)
+3. `chart.AddSerie()`: Add Serie
+4. `chart.AddXAxisData()`: Add X-axis data
+5. `chart.AddData()`: Add Serie data
+6. `chart.UpdateData()`: Update Serie data
+7. `chart.UpdateXAxisData()`: Update X-axis data
+8. `chart.UpdateDataName()`: Update the name of Serie data
+
+XCharts has an automatic refresh mechanism, but it is also triggered under certain conditions. If you have called the internal component interfaces and encountered components that have not been refreshed, and you cannot find the reason, you can use the following two interfaces to force a refresh:
+
+1. `chart.RefreshAllComponent()`: Refresh chart components, which will re-initialize all components. It is not recommended to use it frequently.
+2. `chart.RefreshChart()`: Refresh chart rendering, which only refreshes the rendering part and will not refresh component text, position, etc.
+3. Each component can also refresh itself by calling `SetAllDirty()`.
+
+:::tip
+
+Use APIs to manipulate data and various lists, not directly access the list for processing.
+
+:::
+
+### Changing Parameters on Main Components
+
+You need to obtain the component first, then modify its parameters:
+
+```csharp
+var title = chart.EnsureChartComponent<Title>();
+title.text = "Simple LineChart";
+title.subText = "normal line";
+
+var xAxis = chart.EnsureChartComponent<XAxis>();
+xAxis.splitNumber = 10;
+xAxis.boundaryGap = true;
+xAxis.type = Axis.AxisType.Category;
+```
+
+:::tip
+
+In older versions without the `EnsureChartComponent()` interface, use `GetOrAddChartComponent()`
+
+:::
+
+### Changing Serie Parameters
+
+For newly added Series:
+
+```csharp
+var serie = chart.AddSerie<Pie>();
+serie.center[0] = 0.5f;
+serie.center[1] = 0.5f;
+serie.radius[0] = 80;
+serie.radius[1] = 90;
+serie.animation.dataChangeEnable = true;
+serie.roundCap = true;
+```
+
+For existing Series:
+
+```csharp
+var serie = chart.GetSerie<Pie>();
+serie.center[0] = 0.5f;
+serie.center[1] = 0.5f;
+serie.radius[0] = 80;
+serie.radius[1] = 90;
+serie.animation.dataChangeEnable = true;
+serie.roundCap = true;
+```
+
+Adding additional components to Serie:
+
+```csharp
+serie.EnsureComponent<AreaStyle>();
+
+var label = serie1.EnsureComponent<LabelStyle>();
+label.offset = new Vector3(0,20,0);
+```
+
+### Changing Parameters on Data Item SerieData
+
+```csharp
+var serieData = chart.AddData(0, 20);
+//var serieData = serie.GetSerieData(0); //To get from existing data
+serieData.radius = 10;
+
+var itemStyle = serieData.EnsureComponent<ItemStyle>(); //Add ItemStyle component to the data item
+itemStyle.color = Color.blue;
+
+```
--- a/Documentation~/fragments/.gitkeep
+++ b/Documentation~/fragments/.gitkeep
--- a/Documentation~/variable.json
+++ b/Documentation~/variable.json
@@ -0,0 +1 @@
+{}
--- a/Documentation~/zh/api.md
+++ b/Documentation~/zh/api.md
--- a/Documentation~/zh/changelog.md
+++ b/Documentation~/zh/changelog.md
--- a/Documentation~/zh/configuration.md
+++ b/Documentation~/zh/configuration.md
--- a/Documentation~/zh/faq.md
+++ b/Documentation~/zh/faq.md
@@ -0,0 +1,151 @@
+---
+sidebar_position: 41
+slug: /faq
+---
+
+# 常见问题
+
+## FAQ 1：如何调整坐标轴与背景的边距？
+
+调整`Grid`组件，可调整上下左右边距。
+
+## FAQ 2：如何让初始动画重新播放？
+
+调用`chart.AnimationReset()`接口。
+
+## FAQ 3：如何自定义折线图饼图的颜色？
+
+通过`Theme`的`colorPalette`调整，或者部分`Serie`下的`LineStyle`和`ItemStyle`。
+
+## FAQ 4：如何给坐标轴上的文本加上单位？
+
+通过`formatter`和`numericFormatter`参数，在`Legend`、`Axis`的`AxisLabel`、`Tooltop`、`Serie`的`Label`都提供该参数的配置。
+
+## FAQ 5：如何让柱形图的柱子堆叠显示？
+
+设置`Serie`下的`stack`，`stack`相同的`serie`会堆叠显示在一个柱子上。
+
+## FAQ 6：如何让柱形图的柱子同柱但不重叠？
+
+设置`Serie`下的`barGap`为`-1`，`stack`为空。
+
+## FAQ 7：如何调整柱形图的柱子宽度和间距？
+
+调整`Serie`下的`barWidth`和`barGap`，多个`serie`时最后一个`serie`的`barWidth`和`barGap`有效。
+
+## FAQ 8：如何调整柱形图单个柱子的颜色？
+
+可通过调整单个`Data`下的`ItemStyle`调整，也可以通过两个`serie`同柱不堆叠来实现，通过设置数据项为`0`来达到类似效果。
+
+## FAQ 9：如何调整图表的对齐方式？
+
+调整RectTransform的锚点，和UGUI的其他组件的用法一致。
+
+## FAQ 10：可以显示超过1000以上的大数据吗？
+
+可以。但`UGUI`对单个`Graphic`限制`65000`个顶点，所以太多的数据不一定能显示完全。可通过设置采样距离`sampleDist`开启采样简化过密曲线。也可以通过设置一些参数来减少图表的顶点数有助于显示更多数据。如缩小图表的尺寸，关闭或减少坐标轴的客户端绘制，关闭`Serie`的`symbol`和`label`显示等。折线图的普通线图`Normal`比平滑线图`Smooth`占用顶点数更少。`1.5.0`以上版本可以设置`large`和`largeThreshold`参数来开启性能模式。
+
+## FAQ 11：折线图可以画虚线、点线、点划线吗？
+
+可以。通过`Serie`下的`lineType`选择线条样式。当要显示的数据过多（成千以上）数据间过密时建议使用`Normal`或者`Step`样式。
+
+## FAQ 12：如何限定Y轴的值范围？
+
+设置`Axis`下的`minMaxType`为`Custom`，自定义`min`和`max`。
+
+## FAQ 13：如何自定义数值轴刻度大小？
+
+默认时通过`Axis`下的`splitNumer`进行自动划分。也可以设置`interval`自定义刻度大小。
+
+## FAQ 14：如何在数据项顶上显示文本？
+
+通过设置`Serie`下的`Label`。3.0版本需要先添加`LabelStyle`组件。
+
+## FAQ 15：如何给数据项自定义图标？
+
+通过设置`Serie`的`data`下的数据项可单独设置`icon`相关参数。
+
+## FAQ 16：锯齿太严重，如何让图表更顺滑？
+
+开启抗锯齿设置（在`Unity`里设置）。调整UI渲染模式为`Camera`模式，开启`MSAA`，设置`4`倍或更高抗锯齿。
+
+## FAQ 17：为什么鼠标移上图表Tooltip不显示？
+
+确认`Tooltip`是否开启；确认父节点是否关闭了鼠标事件。
+
+## FAQ 18：如何取消Tooltip的竖线？
+
+设置`Tooltip`的`type`为`None`。或者调整`lineStyle`的参数。
+
+## FAQ 19：如何自定义Tooltip的显示内容？
+
+自定义总的内容可以通过`Tooltip`的`formatter`。如果只是想调整所有的`serie`的显示格式可以用`itemFormatter`和`titleFormatter`结合。如果想每个`serie`的显示格式不一样，可以定制`serie`的`itemStyle`里的`tooltipFormatter`。具体的用法请查阅[XCharts配置项手册](https://xcharts-team.github.io/docs/configuration#Tooltip-itemFormatter)。
+
+## FAQ 20：如何让y轴显示多位小数？
+
+设置`Axis`下的`AxisLabel`中的`formatter`为`{value:f1}`或`{value:f2}`。`1.5.0`及以上版本通过`numericFormatter`设置。
+
+## FAQ 21：如何用代码动态更新数据？
+
+请查阅`Example`下的代码，`Example13_LineSimple.cs`就是一个简单添加数据构建折线图的例子，其他`Demo`也都是通过代码控制不同的组件实现不同的功能，相关API请查看文档：[XChartsAPI接口](api.md)  。
+
+## FAQ 22：如何显示图例？为什么有时候图例无法显示？
+
+首先，你的`serie`里的`name`需有值不为空。然后开启`Legend`显示，里面的`data`可以默认为空，表示显示所有的图例。如果你只想显示部分`serie`的图例，在`data`中填入要显示的图例的`name`即可。如果`data`中的值都不是系列的`name`，那图例就不会显示。
+
+## FAQ 23：如何做成预设？
+
+做成prefab前，执行一下`Rebuild Chart Object`重新刷新节点，避免有冗余的节点存在。
+
+## FAQ 24：如何在图表上画点画线等自定义内容？
+
+`XCharts`有自定义绘制回调`onCustomDraw`，具体可参考`Example12_CustomDrawing.cs`
+
+## FAQ 25：如何实现心电图类似的数据移动效果？
+
+参考`Example`目录下的`Example_Dynamic.cs`。主要通过设置`maxCache`参数实现。`axis`和`serie`都设置相同的`maxCache`。`maxCache`可固定数据个数，当数据超过设定时会先删除第一个在添加新数据，实现数据移动效果。
+
+## FAQ 26：如何使用背景组件？有什么条件限制？
+
+设置`background`组件的`show`为`true`。
+
+## FAQ 27：Mesh can not have more than 65000 vertices？
+
+这是`UGUI`对单个`Graphic`的顶点数限制。`XCharts`是将图形绘制在单个`Graphic`上，所以也会有这个限制。解决的办法可以参考：[FAQ 10：可以显示超过1000以上的大数据吗？](#可以显示超过1000以上的大数据吗)  
+
+## FAQ 28：为什么serie里设置的参数运行后又被重置了？
+
+检测下代码里是否调用了`RemoveData()`并重新添加`Serie`了。如果想保留`Serie`的配置可以只`ClearData()`，然后重新添加数据。
+
+## FAQ 29：如何修改serie的symbol的颜色？
+
+`Symbol` 的颜色是使用的 `ItemStyle` 的 `color`。
+
+## FAQ 30：导入或更新XCharts时TMP报错如何处理？
+
+XCharts默认时不开启TMP，所以asmdef上没有TMP的引用。当本地开启TMP后再更新XCharts可能会出现这个问题。可通过以下两种方式的任意一种解决：
+
+1. 找到`XCharts.Runtime.asmdef`和`XCharts.Editor.asmdef`，手动加上 `TextMeshPro`的引用
+2. 移除`PlayerSetting`中`Scripting Define Symbols`的`dUI_TextMeshPro`宏
+
+`3.8.0`版本后增加[XCharts-Daemon](https://github.com/XCharts-Team/XCharts-Daemon)守护程序，将XCharts-Daemon导入项目后，在更新XCharts时守护程序会自动根据本地开启的TMP情况刷新asmdef，确保编译正常。
+
+## FAQ 31：支持空数据吗？如何实现折线图断开的效果？
+
+`Serie`的`data`是`double`类型，所以无法表示空数据。可通过开启`Serie`的`ignore`和指定`ignoreValue`来达到空数据的效果。也可以每个`SerieData`设置`ignore`参数。忽略数据后断开还是连接可设置`ignoreLineBreak`参数。
+
+## FAQ 32：2.x版本升级3.x版本时常见的问题有哪些？
+
+1. 出现：`'XCharts.Runtime.XChartsMgr' is missing the class attribute 'ExtensionOfNativeClass'!`的问题时，是因为3.x版本时不需要挂载XChartsMgr，直接删掉场景上的`_xcharts_`节点即可。
+
+## FAQ 33：折线图如何两边不留空白而从0坐标开始显示？
+
+设置X轴的`boundaryGap`参数。
+
+## FAQ 34：如何设置部分Serie不显示Tooltip？
+
+`serie`的`itemStyle`的`itemFormatter`设置为`-`可以忽略该`serie`的`tooltip`。
+
+## FAQ 35：区域折线图在用半透明颜色时有时候会一条叠加的线
+
+这是区域折线图绘制的bug。可以用浅的不透的颜色替代半透明颜色。
--- a/Documentation~/zh/img/readme_buildinchart.png
+++ b/Documentation~/zh/img/readme_buildinchart.png
--- a/Documentation~/zh/img/readme_extendchart.png
+++ b/Documentation~/zh/img/readme_extendchart.png
--- a/Documentation~/zh/img/readme_xcharts3.png
+++ b/Documentation~/zh/img/readme_xcharts3.png
--- a/Documentation~/zh/img/support_alipay.png
+++ b/Documentation~/zh/img/support_alipay.png
--- a/Documentation~/zh/img/support_wechat.png
+++ b/Documentation~/zh/img/support_wechat.png
--- a/Documentation~/zh/img/tutorial01_addcomponent.png
+++ b/Documentation~/zh/img/tutorial01_addcomponent.png
--- a/Documentation~/zh/img/tutorial01_addserie.png
+++ b/Documentation~/zh/img/tutorial01_addserie.png
--- a/Documentation~/zh/img/tutorial01_addseriecomponent.png
+++ b/Documentation~/zh/img/tutorial01_addseriecomponent.png
--- a/Documentation~/zh/img/tutorial01_addseriedatacomponent.png
+++ b/Documentation~/zh/img/tutorial01_addseriedatacomponent.png
--- a/Documentation~/zh/img/tutorial01_axisdata.png
+++ b/Documentation~/zh/img/tutorial01_axisdata.png
--- a/Documentation~/zh/img/tutorial01_linechart1.png
+++ b/Documentation~/zh/img/tutorial01_linechart1.png
--- a/Documentation~/zh/img/tutorial01_linechart2.png
+++ b/Documentation~/zh/img/tutorial01_linechart2.png
--- a/Documentation~/zh/img/tutorial01_linechart3.png
+++ b/Documentation~/zh/img/tutorial01_linechart3.png
--- a/Documentation~/zh/img/tutorial01_linechart4.png
+++ b/Documentation~/zh/img/tutorial01_linechart4.png
--- a/Documentation~/zh/img/tutorial01_linechart_simple.png
+++ b/Documentation~/zh/img/tutorial01_linechart_simple.png
--- a/Documentation~/zh/img/tutorial01_seriedata.png
+++ b/Documentation~/zh/img/tutorial01_seriedata.png
--- a/Show More
+++ b/Show More